• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

cross ref pro line to consumer line products

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cross ref pro line to consumer line products

    Is there a cross ref of pro line to consumer line products. Say M83 equals #7, or whatever? If you doM80 with a PC, what do you use to get the areas you could not get the PC to, or under the tape areas? The same M80, on a foam pad, by hand, etc.?

  • #2
    Re: cross ref pro line to consumer line products

    I would like to see something like this!
    Jezroj
    Sunnyside, California

    Comment


    • #3
      Re: cross ref pro line to consumer line products

      Well, there isnt really a cross reference because the products arent the same, other than pure polishes.

      As for areas a PC cant reach, #80 on a foam pad is good. Also, ScratchX for swirls.
      2017 Subaru WRX Premium - WR Blue

      Comment

      Working...
      X
      gtag('config', 'UA-161993-8');