Tweet
Finally I had the opportunity to try out my new PC7424. The car was a 99 Chevy Blazer 4.3l , wich paint wasnt treated so well.
So first I washd it with NXT car shampoo, then clayed.
I did 2 passes with M83 and W8006 pad
and one pass with M80 and W8006 pad
Toped with two coats of Tech Wax with W9006 pad
Aktually I wanted also one pass of M07 before waxing , one coat of Tech Wax and 2 to 3 coats of M16. But I was working so slow that I didnt have any patients and power to do it like this.
So here are the pictures, suggestions wanted! (notice that I run ot of tire shine and also dont have the hyper dressing yet!)
Test spot before
And after
So first I washd it with NXT car shampoo, then clayed.
I did 2 passes with M83 and W8006 pad
and one pass with M80 and W8006 pad
Toped with two coats of Tech Wax with W9006 pad
Aktually I wanted also one pass of M07 before waxing , one coat of Tech Wax and 2 to 3 coats of M16. But I was working so slow that I didnt have any patients and power to do it like this.
So here are the pictures, suggestions wanted! (notice that I run ot of tire shine and also dont have the hyper dressing yet!)
Test spot before
And after
awesome ,greate job
Awesome work. No matter how many "show off" I've seen, it never seizes to amaze me again & again. The PC/G-100 & Megs M83, M80 are great products. No question about that. Great job Uros.
Comment