Tweet
Hello All,
Is #2 Fine Cut only for use with a rotary buffer of can you get acceptable results with a DA?
Thanks.
Is #2 Fine Cut only for use with a rotary buffer of can you get acceptable results with a DA?
Thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
2k GTi VR6...Mostly Stock -
It's only intended for use with a rotary buffer.
Some people use it with a PC, but Meguiar’s does not recommend it for use with a PC. There is a difference.
You will be better off using a product like #83 DACP with the PC and if this is not aggressive enough to remove the defects, it could be that the defects will need to be removed using rotary buffer.
Mike
Comment