• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Power Cut Compound - New

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Power Cut Compound - New

    Power Cut Compound - New






    POWER CUT COMPOUND
    Introducing Meguiar's NEW professional grade compound for professional detailers. Our new super fast cutting, low swirl compound removes sanding scratches and heavy oxidation without scouring the finish like
    traditional compounds. It is designed to offer speed and efficiency on Marine & RV fiberglass gel coat surfaces.

    32 oz. M9132 MSRP $29.99
    1 Gallon M9101 MSRP $84.99
    Mike Phillips
    760-515-0444
    showcargarage@gmail.com

    "Find something you like and use it often"

  • #2
    Re: Power Cut Compound - New

    Mike, is this in the diminishing abrasives compound family of products ? Next question, what would you follow this up with- pure polish or can you go straight to wax/sealant.

    Thanks

    Glenn
    Keep your mast up and your rudder wet !!

    Comment


    • #3
      Re: Power Cut Compound - New

      Originally posted by Jonesey View Post
      Mike, is this in the diminishing abrasives compound family of products ? Next question, what would you follow this up with- pure polish or can you go straight to wax/sealant.

      Thanks

      Glenn
      You might need to follow up with a less agressive product, it may or may not be LSP ready
      Nick
      Tucker's Detailing Services
      815-954-0773
      2012 Ford Transit Connect

      Comment


      • #4
        Re: Power Cut Compound - New

        Originally posted by Jonesey View Post
        Mike, is this in the diminishing abrasives compound family of products ?
        Yes.

        Originally posted by Jonesey View Post
        Next question, what would you follow this up with- pure polish or can you go straight to wax/sealant.

        Thanks

        Glenn
        That depends upon a lot of factors, M91 Power Cut Compound is a product intended for use by Professionals and the idea being is after it's use you evaluate the results and then balance that against the expectations of the customer and then choose the next product.

        Most boats are white gel-coat and are harder and thicker than most clear coat paints and typically you can get more aggressive with them.

        If after using M91 you see any swirls or haze, then a good second step product would be our M50 Cleaner/Wax liquid version as this is a strong cleaner/wax that contains diminishing abrasives which should remove any swirls or haze plus leave the finish waxed.

        Sorry for the late reply, you're post was made on September 5th at about lunch time, not sure how it slipped through the cracks.


        Mike Phillips
        760-515-0444
        showcargarage@gmail.com

        "Find something you like and use it often"

        Comment

        Working...
        X
        gtag('config', 'UA-161993-8');