Hard subject to describe, but here goes. I have a black 02 SVT Focus. It new with less than 5000 miles on the clock. Wash 2 bucket method - dry and use DC1 & DC2 as needed then NXT.
The weird thing is is some locations I find lint ( from the drying microfibre) and the odd arm hair (I have no shortage of this) trapped under the NXT (its a polymer layer correct?) and I only notice this during the wipe off stage of the NXT.
You may think that I'm nuts but these spots are not there during the washing process - so whats wrong with my process.
Can I use the dc1 locally on these spots then DC2 and the a spot of NXT, or leave it and it'll come out in the wash..
sorry for the newbie question
The weird thing is is some locations I find lint ( from the drying microfibre) and the odd arm hair (I have no shortage of this) trapped under the NXT (its a polymer layer correct?) and I only notice this during the wipe off stage of the NXT.
You may think that I'm nuts but these spots are not there during the washing process - so whats wrong with my process.
Can I use the dc1 locally on these spots then DC2 and the a spot of NXT, or leave it and it'll come out in the wash..
sorry for the newbie question
Comment