Sooner, or later were going to have to degrease our engine, here's the steps for a safe, effective, technique...
1) Make sure engine is cool
2) Cover all water (sensitive) equipment like distributer, fuses, etc with plastic bags or whatevers available...
3) Spray (APC) or (degreaser) over engine {scrub} if necessary...
4) Start vehicle, hose off chemical with fan sprayer nossle, if possible
never soak engine, get off as much grime and grease with the least amount of water.
5) If using pressure washer keep 3 feet away, never get to close to engine with washer you want it set at (FAN) pattern spray no stream...!
6) If you hear belts squeaks it's normal, but if something sounds just not right, turn off motor for a few minutes then restart.
Most vehicles, won't be any problem with these steps.
7) Never attempt these steps on Foreign, exotic vehicles completly different engines and your mistake could be costly....
Thanks for reading (Happy- Degreasing) to you...Joe...
1) Make sure engine is cool
2) Cover all water (sensitive) equipment like distributer, fuses, etc with plastic bags or whatevers available...
3) Spray (APC) or (degreaser) over engine {scrub} if necessary...
4) Start vehicle, hose off chemical with fan sprayer nossle, if possible
never soak engine, get off as much grime and grease with the least amount of water.
5) If using pressure washer keep 3 feet away, never get to close to engine with washer you want it set at (FAN) pattern spray no stream...!
6) If you hear belts squeaks it's normal, but if something sounds just not right, turn off motor for a few minutes then restart.
Most vehicles, won't be any problem with these steps.
7) Never attempt these steps on Foreign, exotic vehicles completly different engines and your mistake could be costly....
Thanks for reading (Happy- Degreasing) to you...Joe...
Comment