Tweet
What should the speed setting be when using ScratchX? I am using the G-100
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Alex
1972 Dodge Dart Swinger360
1998 SVT Cobra 1 of 551
1969 Ford Mustang Fastback
-
Re: What should the speed setting be when using ScratchX?
Select your speed setting as though you were using a cleaner/polish, thus for removing swirls and scratches the 5.0 speed setting.
-
Re: What should the speed setting be when using ScratchX?
Thanks Mike. I read the article in the how to section. About removing swirls with the G-100.
ThanksAlex
1972 Dodge Dart Swinger360
1998 SVT Cobra 1 of 551
1969 Ford Mustang Fastback
Comment
-
Re: What should the speed setting be when using ScratchX?
You could also check out these threads.
The Definitive ScratchX Thread Collection
AndyKeeping MOL family friendly! If you need help or have a question, don't hesitate to shoot me an email or PM. 101impala@gmail.com
Andy M. ModeratorComment
-
Re: What should the speed setting be when using ScratchX?
Thanks Andy. I check it out right now.Alex
1972 Dodge Dart Swinger360
1998 SVT Cobra 1 of 551
1969 Ford Mustang Fastback
Comment
-
Re: What should the speed setting be when using ScratchX?
is there any other speed besides 6 on the PC?
lolComment
-
Re: What should the speed setting be when using ScratchX?
man i tried scratch x w/ pc,and i know my tech. was good,but i dont think i worked it in long enough because it do little to nothing for me.Comment
-
Re: What should the speed setting be when using ScratchX?
It's a very light paint cleaner, key word being light, another way of saying this is it's a very gentle or very non-aggressive paint cleaner.Originally posted by spence82 View Post
If your paint has any hardness to it at all then you'll likely need something like M83 or M80
If you look at all the threads from our Saturday classes here,
Pictures from Saturday Classes
You'll see we always use the M80 at a minimum to remove swirls and scratches because the ScratchX just isn't aggressive enough for most paints when working by machine. It was re-formulated to be used by machine but that doesn't mean it's always the best choice for your project.
It's always good to try it first as sometimes it will work and we teach the philosophy of,
"Always use the least aggressive product to get the job done"
Others find it works great on their car's paint system.
Sometimes you just have to experiment.
Comment
Comment