Advanced Class #2 - Pictures & Comments

[Mike Phillips]

Re: Advanced Class #2 - Pictures & Comments










Sanded Before







Richard aka rbottis working his magic







Beautiful!

[Mike Phillips]

Re: Advanced Class #2 - Pictures & Comments

Busy, busy, busy... when you know the right techniques to use with the right products and pads, it takes half of the work out of the process...

It also makes getting professional results faster, easier and most important... consistent for every car you work on...

Some people look for the lowest price, some people look for the fastest product, but if you're in this for the long run then their's no replacement for professional quality results that you can achieve consistently no matter what kind of paint system you're working on. Now that's valuable.























Last shot, parting shot, best shot...







Thank you to everyone that attended this class.

[Kevin Brown]

Re: Advanced Class #2 - Pictures & Comments

What an absolutely WONDERFUL class...

Followed up with a TOP-NOTCH write-up!

Good times here at MOL... Great work, Mikes!

[54chris]

Re: Advanced Class #2 - Pictures & Comments

Man that looked like an awesome class I wish I could have made it! Nice write up! I think I will be tackling that same job my car has the same orange peel look to it and you guys totally made the car look 1000 times better!(Of coarse after attending this class )

[Sydster]

Re: Advanced Class #2 - Pictures & Comments

W5000 Dual Sided Wool Pad with Adapter to attach to the Rotary Buffer

Just one question about this adapter, got one from ADS recently and it did not fit in my makita rotary it does not screw all the way not even half way. Will I need a different adapter for the makita? Sorry to post this here, just thought it would be better since it was being talked about here.

[Mike Phillips]

Re: Advanced Class #2 - Pictures & Comments

Just one question about this adapter, got one from ADS recently and it did not fit in my Makita rotary it does not screw all the way not even half way. Will I need a different adapter for the Makita? Sorry to post this here, just thought it would be better since it was being talked about here.

If the adapter you bought looks like the one in the above picture, and your Makita is a normal Makita with a 5/8" course thread spindle, like this,



then it's possible the adapter you have has messed up threads. Look at them and you can even try to see if they'll thread onto a 5/8 course thread bolt as a way of trouble shooting.

Contact Rick, I'm sure he'll send you another one to try.

[Sydster]

Re: Advanced Class #2 - Pictures & Comments

Thanks a lot Mike!

[Slick]

Re: Advanced Class #2 - Pictures & Comments

Last shot, parting shot, best shot...

Mike... I fixed it for you... much better now.

[Maserati Mario]

Re: Advanced Class #2 - Pictures & Comments

Look what what I found on ebay;

http://cgi.ebay.com/ebaymotors/MEGUIARS-Meguiars-M105-COMPOUND-KIT-Polish-Auto-Detail_W0QQcmdZViewItemQQ_trkparmsZ72Q3a635Q7c39Q3a1Q7c65Q3a12QQ_trksidZp3286Q2ec0Q2em14QQhashZitem200226219768QQitemZ200226219768