can #50 Cleaner Wax be used with a DA?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
question on #50
Collapse
X
-
Re: question on #50
It sure can, if you have the paste, others scoop some out with a plastic butter knife/plastic spoon and put it on the pad, done it with NXT All Metal Polysh before, works great.Philippians 2:14 - Do all things without grumbling or questioning,
-
Re: question on #50
no, I have the liquid, not the paste.
If the liquid version is not "approved" for DA use, what would be the downside of trying to apply it with a DA? Does it just dry up to dust too quickly?What am I, fly-paper for morons?
Comment
-
Re: question on #50
Originally posted by BarryK View PostIf the liquid version is not "approved" for DA use, what would be the downside of trying to apply it with a DA? Does it just dry up to dust too quickly?
Use the 5.0 Speed Setting and follow all the tips and techniques listed here,
How To use: G110 - G220 - G100 - PC/Porter Cable - UDM
If you're moving up to machine polishing, be sure to read the below thread before starting...
Tips & Techniques for using the G110, G100, G220 and the PC Dual Action Polisher
(These are all similar tools)
Comment
-
Re: question on #50
thanks Mike!
Glad to hear that #50 is approved for use with a DA. The boat is a 27' Fountain speedboat so using a DA will be much quicker than having to do it by hand.
I use a Flex 4301 DA and was thinking of trying a test spot using the #50 and a white CCS LC 6.5" pad and than seeing if I need to go up to an Orange pad or not. All depends on the condition I'll find when I see the boat next weekWhat am I, fly-paper for morons?
Comment
Comment