i have some clear coat overspray on my hood of my truck, what sand paper would be the right choice to wet sand with? will a da polisher, polish out the scratches with a cut pad with m105?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
wet sanding
Collapse
X
-
Re: wet sanding
Before you pull out the sandpaper...
1) What type of overspray is it, and where did it come from ? Just trying to determine what type of "clear coat" it is....
2) Have you tried clay yet ?
MikeMike Pennington
Director of Global Training, Events and Consumer Relations
Meguiar's, Inc.
800-854-8073
mpennington@meguiars.com
-
Re: wet sanding
It will take along time to remove sanding marks with a DA...
Comment
-
-
Re: wet sanding
Anyway the guy who you bought the truck from could buff it out using a rotary ? That would be the best
Then you could come back with your D/A and make it look really nice...Mike Pennington
Director of Global Training, Events and Consumer Relations
Meguiar's, Inc.
800-854-8073
mpennington@meguiars.com
Comment
Comment