• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

compounds by hand after wetsanding?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    compounds by hand after wetsanding?

    i just painted my stator cover and im in the process of wet sanding it now what compounds can you apply by hand to restore the gloss?

    Tags: None
  • #2
    Re: compounds by hand after wetsanding?

    M105 is your best bet. It is an aggressive compound that leaves a very high gloss (for a compound it is unheard of!).

    Comment

    • #3
      Re: compounds by hand after wetsanding?

      how about on the consumer line? i believe, 105 is prof line. (please correct me if i am wrong)

      Comment

      • #4
        Re: compounds by hand after wetsanding?

        Some has had success removing ultra-fine wetsanding marks using Ultimate Compound. We are talking about 2000 grit and higher.

        Comment

        • #5
          Re: compounds by hand after wetsanding?

          You will want to get to the finest grit paper you can.

          Then #105. That is stronger than the Consumer products. If you get good results, and that is an if, you might follow up the #105 with SwirlX.
          2017 Subaru WRX Premium - WR Blue

          Comment

          Previous template Next
          Working...
          X
          gtag('config', 'UA-161993-8');