If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
right now i dont have the last touch or final inspection from meguiars.
But i do have a product thats called final touch, not meguiars, that contains isopropanol, and is made for a final wipe after polishing, prior to Last step protection.
It kinda removes all the remaining oils from the polish and dries very fast.
Have a special tip or technique that you think might help others? Post it here!
This will probably be the most effective way to prime your pads.
Hope this helps ya!
Just to note that this is only recommended when using products with SMAT. You are fine because you are using M105 and M205. But people reading that would like to use M80 or any product with diminishing abrasives this is not the way to prime
Comment