application of #39

[79elcamino]

what pad is best for applying #39, a foam or a microfiber pad.

[Tuck91]

Re: application of #39

what pad is best for applying #39, a foam or a microfiber pad.

For cleaning a highly neglected vinyl surface you will get best results using a soft bristled brush.

[Murr1525]

Re: application of #39

I would go MF or terry for general cleaning.

But for general cleaning, #39 probably isnt the best choice. #39 is more for the real bad stuff, like shown above.

[Andrew Wilson]

Re: application of #39

Depending on how aggressive you want to be, a foam pad will be your least aggressive method where as microfiber will be more aggressive. I assume you since you are using 39, you are looking to clean a surface. Microfiber's fiber are super small and great at deep cleaning.

[J. A. Michaels]

Re: application of #39

For larger areas I go with the terry cloth towels. In tighter spots, I use a foam applicator.

[79elcamino]

Re: application of #39

i am using 39 to clean my trim because i tried using UP and it did not dry on the surface and it rained and it streaked all over my paint and mike mentioned that the surface was either still dirty or had an old product still on it.

[cnfowler]

Re: application of #39

i am using 39 to clean my trim because i tried using UP and it did not dry on the surface and it rained and it streaked all over my paint and mike mentioned that the surface was either still dirty or had an old product still on it.

After cleaning the trim, it sounds like you need to read this thread Mr. Stoops posted today.

How to apply Ultimate Protectant

Colin

[Calais]

Re: application of #39

Quick question - why would someone choose M39 over APC/APC+? I have APC, any real reason why I should grab some M39 too?

[79elcamino]

Re: application of #39

i bought 39 over apc because i dont need a gallon of a product

[roushstage2]

Re: application of #39

A terry towel and a brush.

[79elcamino]

Re: application of #39

which is more aggressive megs foam pad and megs microfiber pad??

[roushstage2]

Re: application of #39

As far as aggressiveness goes for materials: Terry > Foam > MF

[Murr1525]

Re: application of #39

Quick question - why would someone choose M39 over APC/APC+? I have APC, any real reason why I should grab some M39 too?

#39 will be stronger, basically a strong, safe dedicated vinyl cleaner.

Unless you are running into real bad dirt on something, probably not a nessecity.

which is more aggressive megs foam pad and megs microfiber pad??

As mentioned, the MF will be mild, but you may find the fibers of the MF will work better on a textured surface, getting into the grooves.