Which pad for #80 ??

[rmaurin]

All,

I have been using #83/8006 pad on my PC with great success. I have read on this forum that following up with #80 takes the #83 finish to another level. What pad should I use with #80 and a PC? 8006 or 9006? Which pad with #83 and a rotary?

Thank you.
Rich Maurin

[superswamper]

Did you check out this thread that Mike starting regarding product and pad usage on the PC? Hope this helps.

http://www.meguiarsonline.com/forums...&threadid=2524

[Rockpick]

Originally posted by superswamper
Did you check out this thread that Mike starting regarding product and pad usage on the PC? Hope this helps.

http://www.meguiarsonline.com/forums...&threadid=2524

The thread that SS mentioned specifically refers to the PC, which pad, speed, and product. THIS THREAD spells out the same information but for the ROTARY BUFFER.

I hope that helps! Please feel free to post any additional questions that you may have!

RP

[Mike Phillips]

Re: Which pad for #80 ??

Originally posted by rmaurin
All,

I have been using #83/8006 pad on my PC with great success. I have read on this forum that following up with #80 takes the #83 finish to another level. What pad should I use with #80 and a PC? 8006 or 9006? Which pad with #83 and a rotary?

Thank you.
Rich Maurin

Hi Rich,

Use the W-8006 with the #80 Speed Glaze, at the 4.5 to 5.0 setting

Use the W-8006 with the #83 on the rotary in a range of 1300 to 1500 RPM's.

I sent you an e-mail about your other question.

Mike