Tweet
Customer wanted a general wash/wax and interior cleanup. Car had light swirling and once I pointed them out, we agreed that a M205 polish followed by wax treatment would do the trick for at least a 90% correction. Temperature yesterday was forecasted at 110 and it ended the day at 113. I was eager to get an early start.
I just bought a new Canon T2i camera and I am still learning all the settings.
Process:
GET STARTED EARLY!
Engine:
APC and various brushes and mitt
Rinse with hose nozzle on flat spray
Compressed air at 70# pressure
Dressed painted area's with UQW
No other dressing was applied at customer request.
Interior:
Vacuum/dry brush/Vacuum (dry brush technique compliments of Nick/Tuck91)
APC as needed
Natural Shine
M40 on rubber seals
LGM for seats only.
Various terry clothes and MF towels
Exterior:
Wheels/Tires/Wheel Wells washed with APC, Hot Rims All Wheel Cleaner and various brushes
Tires and wheel wells dressed with HD 4:1 Wheels sealed with M21
Body Solvent as needed
Door Jams cleaned with APC, brushes and MF towels
Clay with Meg Mild Clay and Last Touch 1:1
Polish with M205 (one pass)
Wax with NXT Tech Wax 2.0 (x2)
Final Wipe Down with LT
Some BEFORE Pics
This is what the clay looked like after just 1/4 of the top!
Some AFTER Pics
Thanks for looking.
I just bought a new Canon T2i camera and I am still learning all the settings.
Process:
GET STARTED EARLY!
Engine:
APC and various brushes and mitt
Rinse with hose nozzle on flat spray
Compressed air at 70# pressure
Dressed painted area's with UQW
No other dressing was applied at customer request.
Interior:
Vacuum/dry brush/Vacuum (dry brush technique compliments of Nick/Tuck91)
APC as needed
Natural Shine
M40 on rubber seals
LGM for seats only.
Various terry clothes and MF towels
Exterior:
Wheels/Tires/Wheel Wells washed with APC, Hot Rims All Wheel Cleaner and various brushes
Tires and wheel wells dressed with HD 4:1 Wheels sealed with M21
Body Solvent as needed
Door Jams cleaned with APC, brushes and MF towels
Clay with Meg Mild Clay and Last Touch 1:1
Polish with M205 (one pass)
Wax with NXT Tech Wax 2.0 (x2)
Final Wipe Down with LT
Some BEFORE Pics
This is what the clay looked like after just 1/4 of the top!
Some AFTER Pics
Thanks for looking.
You did a good job there im going to take notes,I cant beleive the owner/customer left all that junk in the car for you to work around
Comment