Some of us have a keen eye for detail and notice that on a dark colored car if you look closely sometimes you will find lint left over on the surface from your microfibers. I just did a little experimenting and ironed out my microfiber with a lint roller. It removed the majority of the lint in the towel. Another technique that I tried was instead of stopping at the end of the panel to change direction, I simply went off the panel with my swipe and brought the next swipe down the next portion of the panel. It seems that when stopping and changing direction this is when the most linting occurs. Usually around the end of the panel when you change direction of the swipe.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Lint roller/microfiber
Collapse
X
Comment