• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

M66 Problems

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    M66 Problems

    I have almost a full gallon of M66 left. I tried to pour it into a container tonight, and it had separated!!

    This stuff is extremely watery when shaken, I could almost spray it. No amount of shaking proved to mix in the 'water'.

    This isn't good, is it?
    Tags: None
  • #2
    Re: M66 Problems

    Unfortunately if it won't mix together after a good shake it isn't usable.

    Comment

    • #3
      Re: M66 Problems

      I figured.

      What would cause this if it hasn't been frozen?

      Comment

      • #4
        Re: M66 Problems

        Old age

        Comment

        • #5
          Re: M66 Problems

          Definitly not good.

          M66 is not supposed to be watery at all.
          Nick
          Tucker's Detailing Services
          815-954-0773
          2012 Ford Transit Connect

          Comment

          • #6
            Re: M66 Problems

            Usually caused by exposure to extremes of temperature (hot or cold) or even the age of the product itself.

            Comment

            • #7
              Re: M66 Problems

              Maybe can be used as a sprayable AKA hyper polishing compound...

              Comment

              Previous template Next
              Working...
              X
              gtag('config', 'UA-161993-8');