Previously i reviewed that G110v2 was the best machine that i've ever used. It didn't bogged down even with speed setting 1 or 3 or 5. After several applications with Meguiars Polish & Finishing pad, it feels like v1 all over again, occasional rotational action stop and the pad feels heavy/dragged along.
My friend just bought the new G220v2 and tried it out as comparison. Came to a surprise that G220v2 had a soft start like rotary and felt more powerful.
Theory #1: I live in 220v environment, so i figured gotta be the transformer that change the 220v input into 110v output that caused the problem.
Theory #2: My pads are slightly curved, so the non-flatness might cause the problem.
So i tried to disprove my theory by using my cuved pads on his 220v2 machine, it rotated like normal, unlike in mine which bogged down a lot. So my question: Is there any design improvement on G220v2, specifically the soft start? I bought my G110v2 about March/April 2010, so it's not that long ago.
Also regarding the Meguiars pad: I switched to a brand new flat Meguiars pad, and the problem disappeared as well. It made me to turn into Lake Country 5.5" pad cause it's much more manageable and the pressure is more even to the pad due to smaller gap between the pad and 5" Backing Plate. The difference between 7" pad and 5.5" pad are night and day, i can finally make my D/A to feel like a mini rotary once more. So here comes question #2: Does anyone experiencing the same thing? I used the pad about 4-5 cars since my first purchase and they already bogged down the machine.
Thx
My friend just bought the new G220v2 and tried it out as comparison. Came to a surprise that G220v2 had a soft start like rotary and felt more powerful.
Theory #1: I live in 220v environment, so i figured gotta be the transformer that change the 220v input into 110v output that caused the problem.
Theory #2: My pads are slightly curved, so the non-flatness might cause the problem.
So i tried to disprove my theory by using my cuved pads on his 220v2 machine, it rotated like normal, unlike in mine which bogged down a lot. So my question: Is there any design improvement on G220v2, specifically the soft start? I bought my G110v2 about March/April 2010, so it's not that long ago.
Also regarding the Meguiars pad: I switched to a brand new flat Meguiars pad, and the problem disappeared as well. It made me to turn into Lake Country 5.5" pad cause it's much more manageable and the pressure is more even to the pad due to smaller gap between the pad and 5" Backing Plate. The difference between 7" pad and 5.5" pad are night and day, i can finally make my D/A to feel like a mini rotary once more. So here comes question #2: Does anyone experiencing the same thing? I used the pad about 4-5 cars since my first purchase and they already bogged down the machine.
Thx
Comment