Tweet
Hey everyone, I've been washing and waxing my truck for the past year and not since recently have I looked into other Meguiar's products. Now my paint finish has plenty of swirl marks and quite a few scratches, I'm wondering which order I should use the Swirl X and Scratch X 2.0?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Proper steps to getting best results
First off, welcome to MOL!
As for your question, you normally wouldn't use both SwirlX and ScratchX 2.0 as they're pretty closely related, ScratchX 2.0 being a bit more aggressive of the two. For routine swirls and light scratches, especially when going over the entire vehicle, we generally recommend Ultimate Compound as the go to product. We also always recommend doing a test spot on the hood first to get a feel for how the paint reacts to your input, and to judge just how aggressive you do or do not need to be to get the results you're looking for.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment