Pictures from May 5, 2012 - Saturday Advanced Class
Results 1 to 6 of 6

Thread: Pictures from May 5, 2012 - Saturday Advanced Class

          
  1. #1
    Sr. Global Product & Training Spec Michael Stoops's Avatar
    Join Date
    Oct 2004
    Location
    Irvine, CA
    Posts
    21,401
    Rep Power
    1137

    Pictures from May 5, 2012 - Saturday Advanced Class




    Advanced Class - Pictures & Comments
    Meguiar's Car Care 201
    Saturday May 5, 2012


    More damp sanding and rotary buffing - a first for everyone in this class!



    We start with some basic theory in the classroom before heading out for some practical work. We start by damp sanding with a Unigrit 1500 grit finishing disc on a DA sander, then refine those sanding marks with 3000 grit finishing.

    Here, 1500 grit starts cutting the clear coat, which accounts for the white foam you see here.


    Following the 1500 grit sanding this is what you should see - a very uniform and totally matte finish.


    We then refined the sanding marks with 3000 grit media.


    As you can see, we're actually gaining some gloss back after refining with 3000 grit. You can start to see the reflection of the overhead lights in the paint again.


    From there we move on to rotary compounding. Clean your pads often when working with a rotary and you'll obtain a better result in less time. Here we spur the wool pad to remove any old, dried compound.


    We started at 1800 rpm and kept the pad nice and flat against the paint. This maximizes results and minimizes the chance of inflicting buffer swirls (AKA holograms).


    Put the pad up on an edge like this, and move it very quickly over the paint, and you will get holograms. So don't do this!


    We also demonstrated the W7207 foam cutting pad, and talked about how much more quickly it can build heat than a wool pad can. Where we quickly stabilized at about 120F with the wool pad, we could quickly reach 150F or even more with the foam cutting pad. Getting aggressive on an edge of the panel with this pad very quickly brought us close to 170F, and that's getting dangerous. Things you would do without worry when using a DA can turn around and bit you pretty quickly with a rotary. Pay attention to what you're doing!!!


    A final finish polish with M205 on a W9207 Soft Buff 2.0 foam finishing pad and the paint is once again clear and highly reflective.


    After a quick lunch, it was time to turn the students loose on our test panels.










    Thanks to everyone who came out for the day, and we hope to see some of you at an upcoming TNOG!!
    Michael Stoops
    Senior Global Product & Training Specialist | Meguiar's Inc.

    Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

  2. #2
    BMW Nut smack's Avatar
    Join Date
    May 2010
    Location
    Belleville Ill
    Posts
    942
    Rep Power
    19

    Re: Pictures from May 5, 2012 - Saturday Advanced Class

    Looks like a great class to really open up peoples views on how far you can go to achieve that show car shine or to remove stubborn defects.
    Practice doesn't make perfect, the dedication to achieve perfection makes perfect. "Smack"
    2011 Jet Black 328i Touring
    2007 Jet Black 335i Sedan

  3. #3
    Registered Member
    Join Date
    Apr 2012
    Location
    Sherman Oaks California
    Posts
    15
    Rep Power
    8

    Re: Pictures from May 5, 2012 - Saturday Advanced Class

    Great class, very informative, super instruction... thanks Mike!!

    I'm no longer afraid to use a rotary buffer.

    Barry

  4. #4
    Registered Member
    Join Date
    Dec 2010
    Location
    Redondo Beach California
    Posts
    14
    Rep Power
    9

    Re: Pictures from May 5, 2012 - Saturday Advanced Class

    Thanks Mike, the class was awesome and we really appreciate everything Meguiar's does for us. You guys definietly go above and beyond!

  5. #5
    I <3 my IS F CreamPuff's Avatar
    Join Date
    Feb 2008
    Location
    Socal, CA
    Age
    35
    Posts
    306
    Rep Power
    18

    Re: Pictures from May 5, 2012 - Saturday Advanced Class

    Quote Originally Posted by Xzotik View Post
    I'm no longer afraid to use a rotary buffer.
    Barry
    I'm still kind of afraid to use a rotary buffer until I get some more experience before I do it on my own car :p

    I still think about how half the class didn't even show up after they had signed up...terrible...I'd put them on the "BAN" list for the rest of the year.

  6. #6
    Registered Member
    Join Date
    Dec 2010
    Location
    Redondo Beach California
    Posts
    14
    Rep Power
    9
    I think a test Hood of my very own is in my future

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Pictures from March 10, 2012 - Saturday Advanced Class
    By Michael Stoops in forum Pictures from Meguiar's Training Garage - Intro to Wet Sanding & Rotary Polishing Classes
    Replies: 3
    Last Post: Mar 25th, 2012, 07:37 PM
  2. Pictures from October 8, 2011 - Saturday Advanced Class
    By Michael Stoops in forum Pictures from Meguiar's Training Garage - Intro to Wet Sanding & Rotary Polishing Classes
    Replies: 2
    Last Post: Oct 10th, 2011, 12:36 PM
  3. Pictures from May 21, 2011 - Saturday Advanced Class
    By Michael Stoops in forum Pictures from Meguiar's Training Garage - Intro to Wet Sanding & Rotary Polishing Classes
    Replies: 2
    Last Post: Jun 1st, 2011, 01:20 PM
  4. Pictures from May 22, 2010 - Saturday Advanced Class
    By Michael Stoops in forum Pictures from Meguiar's Training Garage - Intro to Wet Sanding & Rotary Polishing Classes
    Replies: 7
    Last Post: Jul 23rd, 2010, 08:01 PM
  5. Pictures from March 20, 2010 - Saturday Advanced Class
    By xerxesdiego in forum Pictures from Meguiar's Training Garage - Intro to Wet Sanding & Rotary Polishing Classes
    Replies: 6
    Last Post: Mar 31st, 2010, 10:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •