New Toy - #5000 Grit Trizact Foam Finishing Discs

[Mike Phillips]

Re: New Toy - #5000 Grit Trizact Foam Finishing Discs

bookmark.

Mike, I saw you at the meet and greet at Nick Chapman's place in Dallas years ago. He hasn't posted here in a long time. Have you heard from him??

Yes, spoke with him recently, he's doing great. Really going after high end and exotic cars. Check out his Facebook Page.

[smack]

Re: New Toy - #5000 Grit Trizact Foam Finishing Discs

I saw you had Meguiars mf system on the table. Would love to see how the d300/cutting disc does.

Thanks for taking my request and putting the video up for all of us to see Mike. Really appreciate it.

[smurf]

Re: New Toy - #5000 Grit Trizact Foam Finishing Discs

What speed setting are you guys using with the Trizact 1500 and the 3000 on the DA.

[Michael Stoops]

Re: New Toy - #5000 Grit Trizact Foam Finishing Discs

When using an electric DA for damp sanding speed settings 3 and 4 should be used. 4 is actually a bit less aggressive and recommended as the starting point since slower speeds will allow the tool to cut into the paint more, while too high a speed can actually cause the abrasive media to hydroplane up onto the water and reduce the cut.

[smurf]

Re: New Toy - #5000 Grit Trizact Foam Finishing Discs

When using an electric DA for damp sanding speed settings 3 and 4 should be used. 4 is actually a bit less aggressive and recommended as the starting point since slower speeds will allow the tool to cut into the paint more, while too high a speed can actually cause the abrasive media to hydroplane up onto the water and reduce the cut.

Thanks Michael just in the process doing a V8 Triumph Stag sand and polish