So, a little different twist here. I've used Megs with great success on my vehicles for years. I've just completed a restoration on the cast iron top of my 50 (yes, 5-0) year old table saw and need to get to the high luster stage. I started with 320 on a DA followed by 600-2000 wet-dry by hand. I'm not after a mirror finish, but pretty darn close. I'm thinking that 105 may do the trick, but am seeking advice from those who have been down this path. If 105 has silicone in it, that would be a show stopper. Woodworking and silicone don't play well together at all. Tools on hand: rotary, DA, numerous expendable pads, elbow grease. All advice welcome. TIA
Gavin Payne
Gavin Payne
Comment