Tweet
My barber got a new chair for me, and I guess his other customers too.
It is such a nice chair and I asked him if he put any protection on it and he said no. As he was he was perfecting my flat top I though that this would be a great test area for Meguiar's New Leather Sealer Treatment.
So I'll check on the chair every few weeks and we'll see how the LST hold up.
So after a nice detail today I went to the shop, picked some LST up and off the the Barber Shop I went.
Products and tools used:
Meg's LST
D156 Express Wax
Hyper Dressing
Boars Hair Brush
Small Narrow Nylon brush
Meg's Hand Foam Applicator Pad
2 Micro Fiber Towels
1 Terry Towel
Stanley LED Light
Stinger Wet/Dry Vac
The chair had alot of little hairs on it along with dust and general dirt.
I vacuumed it up and brushed all the cracks clean.
Then (and here's the tip of the day) I read the instructions on the Leather Sealer Treatment.
Used the boars hair brush with the cleaner to make sure it got into the leather sufficiently. A wipe with a micro fiber towel and the cleaning was done.
Then rubbed in the Sealer Treatment with the foam pad nice and evenly.
For the wood I use D156 Express Wax, Hyper Dressing on the foot rest and the back of the chair.
Done!
Here's the icky, hairy before pics:
Close up of the foot rest
The arms weren't to dirty but there was dirt
Seat wasn't to bad
after the cleaning
The chair is already showing signs of ware
After Application of LST, D156 and Hyper Dressing:
It is such a nice chair and I asked him if he put any protection on it and he said no. As he was he was perfecting my flat top I though that this would be a great test area for Meguiar's New Leather Sealer Treatment.
So I'll check on the chair every few weeks and we'll see how the LST hold up.
So after a nice detail today I went to the shop, picked some LST up and off the the Barber Shop I went.
Products and tools used:
Meg's LST
D156 Express Wax
Hyper Dressing
Boars Hair Brush
Small Narrow Nylon brush
Meg's Hand Foam Applicator Pad
2 Micro Fiber Towels
1 Terry Towel
Stanley LED Light
Stinger Wet/Dry Vac
The chair had alot of little hairs on it along with dust and general dirt.
I vacuumed it up and brushed all the cracks clean.
Then (and here's the tip of the day) I read the instructions on the Leather Sealer Treatment.
Used the boars hair brush with the cleaner to make sure it got into the leather sufficiently. A wipe with a micro fiber towel and the cleaning was done.
Then rubbed in the Sealer Treatment with the foam pad nice and evenly.
For the wood I use D156 Express Wax, Hyper Dressing on the foot rest and the back of the chair.
Done!
Here's the icky, hairy before pics:
Close up of the foot rest
The arms weren't to dirty but there was dirt
Seat wasn't to bad
after the cleaning
The chair is already showing signs of ware
After Application of LST, D156 and Hyper Dressing:
Comment