drill for Dual Action Power System tool

[pagaz]

hello,
i want to buy " Dual Action Power System tool " .
i dont have power source so i think buy & connect cordless drill .
someone here thet use cordless , which cordless will work with this tool ?
how much rpm i need ?

tnx

[wesleyoh]

Dobt think cordless can do any paint correction.... can use it to apply was though

[Detailing by M]

Re: drill for Dual Action Power System tool

Hello and WELCOME TO MOL!!!!!

Well the only real requirement for the DAPS is at least 2500 RPM I think CD's are only 1800 RPM.
Not to say it won't work but you have remember the Clutch and counter weight slows down the power from the drill.
Now slower speed is great for cutting but to slow just won't work.
On Thursday I'm going to be at Meg's and I'm going to try my DeWalt CD and the DAPS.
Your not the only one wondering about using a CD with the DAPS.
So I'll post my results asap.

[pagaz]

Re: drill for Dual Action Power System tool

ok , I will be wait for the result .
which cordless u going check ?
by the way , in my country sell this cordless :

http://www.google.co.il/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&cad=rja&ved=0CC4QFjAA&url=http%3A%2F%2Fwww.dewalt.com%2Ftools%2Fcordless-drills-drilldrivers-dcd710s2.aspx&ei=r33tUencJNHLtAaXjoHgCw&usg=AFQjCNGxgVT99TDKDnIS5vs770oMm5KgwA&sig2=vaY4RyfsER4Aa5i_c1Qqkw&bvm=bv.49478099,d.Yms

what u think ? he could do this job with "da power system " ?

thanks

[JG_Detailing]

I bought a Dewalt cordless drill and then the Dual action power system kit. Haven't used it yet on the paint but I did use it with the headlight kit Meguiars sells and it worked great with it.

[pagaz]

Re: drill for Dual Action Power System tool

I bought a Dewalt cordless drill and then the Dual action power system kit. Haven't used it yet on the paint but I did use it with the headlight kit Meguiars sells and it worked great with it.

what ur cordless model ?

[Detailing by M]

Re: drill for Dual Action Power System tool

Ok I tried out the DAPS on my DeWalt cordless drill.
It has 1700 RPMs and it worked fine. But your going to need more then one battery if you want to do more then just a spot.

[wheelhot]

Re: drill for Dual Action Power System tool

Hi, I have a 3000rpm drill. Would it work with DAPS?

[Detailing by M]

Re: drill for Dual Action Power System tool

Hi, I have a 3000rpm drill. Would it work with DAPS?

yes