If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am replacing my bolts for my gas filler neck on a dodge ram "white paint" Around 1 or 2 of the bolts there is some rust color bleeding from the bolts,,,what is best to try to get that out?
I am replacing my bolts for my gas filler neck on a dodge ram "white paint" Around 1 or 2 of the bolts there is some rust color bleeding from the bolts,,,what is best to try to get that out?
Re: removing rust stain on white paint from a bolt
I'll have to check that out,,I was going to try some rubbing No.7 rubbing compound i bought to get a rust color stain out from the inside of my door where the door skin is wrapped around the inside edge..I have a bit of brownish stuff in the seam there too.
I am replacing my bolts for my gas filler neck on a dodge ram "white paint" Around 1 or 2 of the bolts there is some rust color bleeding from the bolts,,,what is best to try to get that out?
TIA
Hi,
I used Meguiars Ultimate Compound to remove rust stains from the roof racks on my white Holden Rodeo ute, it works great, just apply and buff off.
Hope that helps,
All the best,
AB747
Hi,
I used Meguiars Ultimate Compound to remove rust stains from the roof racks on my white Holden Rodeo ute, it works great, just apply and buff off.
Hope that helps,
All the best,
AB747
Thanks for sharing AB747 & welcome to MOL.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Comment