how much better is d300 than UC on microfibre

[jebrovia]

Im gradually working around my car using Ultimate compound as my first step with microfibre pads on my da.
Ive found this combo a pleasure to use and it produces much faster and better results than any of my hexlogic pads.
Anyway im in need of more product and want to know if the d300 microfibre compound is better than UC ? With regards to ease of use, correction and finishing ability

[Christopher.Brown]

Re: how much better is d300 than UC on microfibre

The MF pads are much more aggressive than the hex pads. D300 is a little more aggressive than Ultimate Compound. It was formulated for meg's cutting MF pads as a system to help replace old bodyshop refinishing techniques for time as well as being much gentler on the paint. It has a low low dust rate and medium/long working time. I have personally removed some pretty nasty rids with it. So i believe when Senior Stoops says it can remove 3000 grit sanding marks easy!

As far as finishing it real impressive... although if you are correcting medium to heavy defects i would definitely follow up with some M205, especially for softer paing because the DA MF system will mar the paint.


i say try it!

IF nothing else it gives you an excuse to buy the best correcting product on the market .... M205

[Detailing by M]

Re: how much better is d300 than UC on microfibre

UC is a consumer product "made safe" for the average person.
D300 is in the Detailer line and is more for the advanced person and will out perform UC
But UC in the right hands can do some amazing things. I'll never buy it but I use M105 & D300.
They both have there place.

[Michael Stoops]

Re: how much better is d300 than UC on microfibre

The MF pads are much more aggressive than the hex pads. D300 is a little more aggressive than Ultimate Compound. It was formulated for meg's cutting MF pads as a system to help replace old bodyshop refinishing techniques for time as well as being much gentler on the paint. It has a low low dust rate and medium/long working time. I have personally removed some pretty nasty rids with it. So i believe when Senior Stoops says it can remove 3000 grit sanding marks easy!

As far as finishing it real impressive... although if you are correcting medium to heavy defects i would definitely follow up with some M205, especially for softer paing because the DA MF system will mar the paint.


i say try it!

IF nothing else it gives you an excuse to buy the best correcting product on the market .... M205

Yeah, this petty well sums it all up!