• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

M20 Polymer Sealant

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    M20 Polymer Sealant

    Have quick question, from someone who uses M20. Since M20 is kind of a hybrid (natural & synthetic) cleaner/wax will it leave a white residue on plastic or rubber trim areas like a straight Carnauba wax like M26 or carnauba based cleaner/wax like M06 can?

    Thanks!
    Vettefan
    Tags: None
  • #2
    Re: M20 Polymer Sealant

    To my knowledge, only Meg's wax that does not stain trims is the Ultimate Wax in the liquid form.
    2012 Acura CBP TL SH-AWD Tech

    Comment

    • #3
      Re: M20 Polymer Sealant

      That is my understanding also but just wanted to check for sure with a user.

      Comment

      • #4
        Re: M20 Polymer Sealant

        If allowed to dry on the trim, yes, M20 can stain. If you keep a clean microfiber towel close at hand when applying this or any other wax/sealant, you can immediately wipe off any product you may accidentally get on the trim and prevent the staining from happening. Staining really only happens when the product is allowed to dry on the trim and it gets trapped in the texture of the trim. Immediately wiping with a clean towel, and terry cloth is actually really good for this, you remove the product before it has a chance to dry.
        Michael Stoops
        Senior Global Product & Training Specialist | Meguiar's Inc.

        Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

        Comment

        • #5
          Re: M20 Polymer Sealant

          Super... Thank you! Vettefan

          Comment

          Previous template Next
          Working...
          X
          gtag('config', 'UA-161993-8');