If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Any suggestions for applying #16 with a pc. I used to use a Waxmaster orbital buffer to both apply and remove it. I simply used a butter knife to put the product on the buffer's terry bonnet.
Any suggestions for applying #16 with a pc. I used to use a Waxmaster orbital buffer to both apply and remove it. I simply used a butter knife to put the product on the buffer's terry bonnet.
I have a video that came with my PC that shows a paste wax being applied to the buffer with a foam applicator pad...Is that what you're asking?
Originally posted by tguil Any suggestions for applying #16 with a pc. I used to use a Waxmaster orbital buffer to both apply and remove it. I simply used a butter knife to put the product on the buffer's terry bonnet.
Tom
I use a plastic putty knife to apply #16 to my PC pads, works great.
Don
12/27/2015
"Darth Camaro"
2013 Camaro ... triple black
323 hp V6, 6 speed manual
Originally posted by Rusty Bumper It would be nice if #16 came in a liquid form...I wonder if that would have an effect on the durability of it?
I think applying it by PC would have that exact effect on it. You can almost turn it to liquid by spinning the applicator in the tin with your hand so I figure the PC must be able to do that better.
Comment