Hi everybody -- first post other than my introduction post in the welcome forum.
I need to address some clear coat failure/oxidation on the roof of my 92 saab 900s (scarabe metallic green paint). I've been looking into a rubbing compound, but not sure if it's the right approach. In fact, a little research has lead me to believe that there isn't much that can be done for clear coat failure. Originally I was thinking about testing an area using the clear coat safe rubbing compound -- something that could be applied by hand. I also saw quite bit of information about Ultimate compound, but now I'm not so sure that using a rubbing compound is the right approach. I haven't purchased any products yet because I thought it would be best to consult the experts here on the forum before I go and rub a hole through my paint. Any help or insight on this topic is appreciated.
Thanks,
Bret
I need to address some clear coat failure/oxidation on the roof of my 92 saab 900s (scarabe metallic green paint). I've been looking into a rubbing compound, but not sure if it's the right approach. In fact, a little research has lead me to believe that there isn't much that can be done for clear coat failure. Originally I was thinking about testing an area using the clear coat safe rubbing compound -- something that could be applied by hand. I also saw quite bit of information about Ultimate compound, but now I'm not so sure that using a rubbing compound is the right approach. I haven't purchased any products yet because I thought it would be best to consult the experts here on the forum before I go and rub a hole through my paint. Any help or insight on this topic is appreciated.
Thanks,
Bret
Comment