• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

need advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need advice

    Any tips on the best way to tape off a clear mask? it is pretty hard to see the mask (since it's clear). I am using some 1/4" tape in most spots..wondering if some experts have tips on how to 'follow the mask' with the tape

  • #2
    Re: need advice

    Why do you feel the need to tape off the mask?
    Don
    12/27/2015
    "Darth Camaro"
    2013 Camaro ... triple black
    323 hp V6, 6 speed manual

    Comment


    • #3
      Re: need advice

      Originally posted by Don View Post
      Why do you feel the need to tape off the mask?
      product tends to get trapped on the mask edge..really tough to remove once it's there..

      Comment


      • #4
        Re: need advice

        One of the ways you can avoid getting wax in the crease is to apply the wax in a straight line, moving in the same direction as the film. You can use the same method to remove any wax that has dried in the crease. I used to use this method on the vinyl pin-striping on my old car.
        Don
        12/27/2015
        "Darth Camaro"
        2013 Camaro ... triple black
        323 hp V6, 6 speed manual

        Comment

        Working...
        X
        gtag('config', 'UA-161993-8');