First time out with these products....
I have a 37' RV/ Bus to recondition.
Gel coat is in bad shape and the graphics are way past saving... so no concern with the graphics.
Question is...
If I use M91 with 4-ply wool and rotary for cleaning/cutting.... is Flagship Cleaner Wax 'strong' enough to eliminate the trails left from the rotary when applied with a Rupes 21 and a cutting foam pad (yellow or orange, B&S or LC?) And by eliminate... I don't mean hiding. The color is a light beige. I know gel coat loves oils... and I'm sure RV/ Marine polishes have plenty of them. I could step down my pad choice from 4-ply to a finishing wool if that would help.
Just want to get any experienced answers if I can. If Flagship Cleaner Wax will not elimnate the trails... I could use M205 to refine but then I would be using a dedicated sealant after. Trying to do this in 2 steps.
Thanks for any insights.
Best,
-Gabe
I have a 37' RV/ Bus to recondition.
Gel coat is in bad shape and the graphics are way past saving... so no concern with the graphics.
Question is...
If I use M91 with 4-ply wool and rotary for cleaning/cutting.... is Flagship Cleaner Wax 'strong' enough to eliminate the trails left from the rotary when applied with a Rupes 21 and a cutting foam pad (yellow or orange, B&S or LC?) And by eliminate... I don't mean hiding. The color is a light beige. I know gel coat loves oils... and I'm sure RV/ Marine polishes have plenty of them. I could step down my pad choice from 4-ply to a finishing wool if that would help.
Just want to get any experienced answers if I can. If Flagship Cleaner Wax will not elimnate the trails... I could use M205 to refine but then I would be using a dedicated sealant after. Trying to do this in 2 steps.
Thanks for any insights.
Best,
-Gabe