G110v2 replacement pads?

[pdude]

I have the G110v2 6" DA Polisher and have been using the 7" pads for years. I used to get the 7" W8207 Soft Buff 2.0 Polishing Pad (Yellow) and 7" Finishing Pad (Black).

They don't seem to be available any more. Are the replacements for these the WRFP7 (Yellow) and WRFF7 (Black)? They don't mention DA so wasn't sure if there was another recommendation?

Thanks

[roushstage2]

Re: G110v2 replacement pads?

I bought the new 5" pads and backing plate for my G100.

[The Guz]

Re: G110v2 replacement pads?

I bought the new 5" pads and backing plate for my G100.

I would also recommend going with the 5" plate and then new foam discs.

[pdude]

Re: G110v2 replacement pads?

I would also recommend going with the 5" plate and then new foam discs.

thanks, I'll look into those as a new option.

[Nick Winn]

Re: G110v2 replacement pads?

Although you will need to invest in a new backing plate, the new Soft Buff DA Foam Discs will transform your tool. Much smoother operation & feel, also with the ability for more defect removal with the Soft Buff DA Foam Cutting Disc. We recommend the 5 Inch size for your tool. The WRFP7 (Yellow) and WRFF7 (Black) are technically recommended for rotary only. More information on the new low profile foam discs can be referenced below:

Meguiar's Soft Buff DA Foam Discs & Backing Plates

Nick

[pdude]

Re: G110v2 replacement pads?

Although you will need to invest in a new backing plate, the new Soft Buff DA Foam Discs will transform your tool. Much smoother operation & feel, also with the ability for more defect removal with the Soft Buff DA Foam Cutting Disc. We recommend the 5 Inch size for your tool. The WRFP7 (Yellow) and WRFF7 (Black) are technically recommended for rotary only. More information on the new low profile foam discs can be referenced below:

Meguiar's Soft Buff DA Foam Discs & Backing Plates

Nick

I was a little bummed at first, but it does seem like a lot of people are finding it better so I will have to try these out. Plus it's not too pricey to get another plate. Thanks.

[drumdan]

Re: G110v2 replacement pads?

I was a little bummed at first, but it does seem like a lot of people are finding it better so I will have to try these out. Plus it's not too pricey to get another plate. Thanks.

I bet you will really like the new pads!