Results 1 to 7 of 7

Thread: G110v2 replacement pads?

          
  1. #1
    Registered Member pdude's Avatar
    Join Date
    Aug 2010
    Location
    Orange County, California
    Posts
    9
    Rep Power
    8

    G110v2 replacement pads?

    I have the G110v2 6" DA Polisher and have been using the 7" pads for years. I used to get the 7" W8207 Soft Buff 2.0 Polishing Pad (Yellow) and 7" Finishing Pad (Black).

    They don't seem to be available any more. Are the replacements for these the WRFP7 (Yellow) and WRFF7 (Black)? They don't mention DA so wasn't sure if there was another recommendation?

    Thanks

  2. #2
    Registered Member roushstage2's Avatar
    Join Date
    Jun 2005
    Location
    The Real NorCal
    Posts
    4,103
    Rep Power
    142

    Re: G110v2 replacement pads?

    I bought the new 5" pads and backing plate for my G100.


  3. #3
    Michael The Guz's Avatar
    Join Date
    Jul 2013
    Location
    Lawndale, CA
    Age
    38
    Posts
    5,210
    Rep Power
    58

    Re: G110v2 replacement pads?

    Quote Originally Posted by roushstage2 View Post
    I bought the new 5" pads and backing plate for my G100.
    I would also recommend going with the 5" plate and then new foam discs.

  4. #4
    Registered Member pdude's Avatar
    Join Date
    Aug 2010
    Location
    Orange County, California
    Posts
    9
    Rep Power
    8

    Re: G110v2 replacement pads?

    Quote Originally Posted by The Guz View Post
    I would also recommend going with the 5" plate and then new foam discs.
    thanks, I'll look into those as a new option.

  5. #5
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    5,506
    Rep Power
    63

    Re: G110v2 replacement pads?

    Although you will need to invest in a new backing plate, the new Soft Buff DA Foam Discs will transform your tool. Much smoother operation & feel, also with the ability for more defect removal with the Soft Buff DA Foam Cutting Disc. We recommend the 5 Inch size for your tool. The WRFP7 (Yellow) and WRFF7 (Black) are technically recommended for rotary only. More information on the new low profile foam discs can be referenced below:

    Meguiar's Soft Buff DA Foam Discs & Backing Plates

    Nick
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

  6. #6
    Registered Member pdude's Avatar
    Join Date
    Aug 2010
    Location
    Orange County, California
    Posts
    9
    Rep Power
    8

    Re: G110v2 replacement pads?

    Quote Originally Posted by Nick Winn View Post
    Although you will need to invest in a new backing plate, the new Soft Buff DA Foam Discs will transform your tool. Much smoother operation & feel, also with the ability for more defect removal with the Soft Buff DA Foam Cutting Disc. We recommend the 5 Inch size for your tool. The WRFP7 (Yellow) and WRFF7 (Black) are technically recommended for rotary only. More information on the new low profile foam discs can be referenced below:

    Meguiar's Soft Buff DA Foam Discs & Backing Plates

    Nick
    I was a little bummed at first, but it does seem like a lot of people are finding it better so I will have to try these out. Plus it's not too pricey to get another plate. Thanks.

  7. #7
    Registered Member drumdan's Avatar
    Join Date
    Jan 2007
    Location
    Rochester Hills, Michigan
    Posts
    444
    Rep Power
    16

    Re: G110v2 replacement pads?

    Quote Originally Posted by pdude View Post
    I was a little bummed at first, but it does seem like a lot of people are finding it better so I will have to try these out. Plus it's not too pricey to get another plate. Thanks.
    I bet you will really like the new pads!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. G220V2 or G110V2 - Replacement wrench and carbon brushes
    By scoutfai in forum The Dual Action Polisher
    Replies: 2
    Last Post: Oct 23rd, 2016, 01:40 AM
  2. Where to find replacement pads for G110
    By gr8 in forum The Dual Action Polisher
    Replies: 3
    Last Post: Aug 10th, 2015, 07:44 AM
  3. Replacement wrench for the G110v2... anyone?!
    By jusstin4171 in forum The Dual Action Polisher
    Replies: 9
    Last Post: Apr 26th, 2012, 11:47 AM
  4. G110v2 - Confused by what pads I need
    By Lanc1988 in forum The Dual Action Polisher
    Replies: 7
    Last Post: Mar 28th, 2010, 11:41 AM
  5. G110v2 replacement Brushes?
    By dedonderosa in forum Customer Service Hotline
    Replies: 2
    Last Post: Jan 15th, 2010, 02:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •