Wetsanding with the MT300
Results 1 to 2 of 2

Thread: Wetsanding with the MT300

          
  1. #1
    Registered Member
    Join Date
    Sep 2015
    Location
    Montreal, QC, Canada
    Posts
    28
    Rep Power
    4

    Question Wetsanding with the MT300

    Hi guys,

    I'm not sure this is a stupid question or not but here goes:
    Does it make sense to try to remove orange peel on a car using this combo: MT300+ DBP5 5" backing plate + S6FI foam interface + Unigrit Sanding disks.

    Weekend warrior here and my brand new MT300 soaked up my power tool budget for the time.
    A hand sander is not on the radar.

    So, is it ok to put a S6FI on a MT300+DBP5?
    Does wet-sanding with the MT300 makes sense? Or would it take forever to get anywhere with it?
    Should I dispense with the foam interface altogether to get any texture levelling done?

    What process would be appropriate for a clear coated rather hard paint like I have on my VW?
    1000 grit+ 2000 grit+ 3000 grit? Or just go 1500 grit+3000 grit?

    thanks,

    Crazy Vinny

  2. #2
    Registered Member
    Join Date
    Sep 2015
    Location
    Montreal, QC, Canada
    Posts
    28
    Rep Power
    4

    Re: Wetsanding with the MT300

    Drats.

    Learned the Unigrit Sanding disks have been discontinued for years.
    I guess this was a stupid question after all.

    Quote Originally Posted by CrazyVinny View Post
    Hi guys,
    I'm not sure this is a stupid question or not but here goes:
    Does it make sense to try to remove orange peel on a car using this combo: MT300+ DBP5 5" backing plate + S6FI foam interface + Unigrit Sanding disks.
    [...]
    thanks,

    Crazy Vinny

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. MT300 buffer
    By alfonsodetailing in forum Customer Service Hotline
    Replies: 2
    Last Post: Aug 1st, 2016, 09:42 AM
  2. MT300 same as MT310?
    By snozan in forum Detailing 101
    Replies: 2
    Last Post: Jul 29th, 2016, 10:47 PM
  3. MT300 First Use ?
    By wig in forum Machines - The Dual Action Polisher
    Replies: 4
    Last Post: May 2nd, 2016, 06:56 PM
  4. MT300 Technique
    By ErnestHouse in forum Machines - The Dual Action Polisher
    Replies: 34
    Last Post: Nov 4th, 2015, 08:17 AM
  5. MT300 ok for amatuers?
    By lowew79 in forum Machines - The Dual Action Polisher
    Replies: 2
    Last Post: Jul 10th, 2015, 10:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •