Prep for Keep clear headlight coating?
Results 1 to 7 of 7

Thread: Prep for Keep clear headlight coating?

          
  1. #1
    Registered Member
    Join Date
    Oct 2017
    Location
    Warren, OH
    Posts
    47
    Rep Power
    2

    Prep for Keep clear headlight coating?

    I've been using wax on my headlights which aren't terrible but aren't great, especially on the tops so I ordered a can of the Keep clear to apply to the flat tops. My question is... What do I need to do to prepare the lights for the coating? I'm guessing something to remove all the wax at a minimum, maybe clay bar or polishing compound? Thanks!

  2. #2
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    6,679
    Rep Power
    76

    Re: Prep for Keep clear headlight coating?

    Hi SLM,

    The only prep which is needed when applying our Keep Clear Headlight Coating on lights in good shape is to clean them with glass cleaner, like our Perfect Clarity Glass Cleaner. Then apply to a clean & dry headlight. Hope this helps! Below is an article I did with more information:

    Using Meguiar's G17804 Keep Clear Headlight Coating

    Feel free to post further questions.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

  3. #3
    Registered Member
    Join Date
    Oct 2017
    Location
    Warren, OH
    Posts
    47
    Rep Power
    2

    Re: Prep for Keep clear headlight coating?

    Thanks Nick! Now I just have to wait for some decent weather when it isn't raining, windy or both!

  4. #4
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    6,679
    Rep Power
    76

    Re: Prep for Keep clear headlight coating?

    Quote Originally Posted by SLM View Post
    Thanks Nick! Now I just have to wait for some decent weather when it isn't raining, windy or both!
    Agreed! It would be best to not expose the coated light to wet weather for 24 hours after application (for best results)!
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

  5. #5
    Registered Member
    Join Date
    Oct 2017
    Location
    Warren, OH
    Posts
    47
    Rep Power
    2

    Re: Prep for Keep clear headlight coating?

    It took forever to get a couple dry days in a row and minimal falling pollen... but I finally got the coating on a week ago. I cleaned the snot out of the lenses, masked them off and sprayed them. I think I got it on a bit heavy as it took almost two days until the coating didn't feel soft and sticky but the humidity was 70% plus. Tonight I waxed them with Black Wax followed by Ultimate liquid. The Black wax took some of the roughness out of the coating and then the Ultimate made them feel like the hard plastic again. If I had it to do again I think I'd spray lighter coats and back off my passes a bit. It defiantly made the lenses clearer on the tops where the factory coating was gone. The interior of the lights are black, not just gray. I have to say I'm well pleased for less than 10 bucks and a few hours of work!

  6. #6
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    6,679
    Rep Power
    76

    Re: Prep for Keep clear headlight coating?

    If you ever need to fully strip the coating, you can use an liberal amount of isopropyl alcohol with a towel, and then use this to remove the Keep Clear Headlight Coating.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

  7. #7
    Registered Member
    Join Date
    Oct 2017
    Location
    Warren, OH
    Posts
    47
    Rep Power
    2

    Re: Prep for Keep clear headlight coating?

    Thanks for the information Nick. If I need to redo it in the future I'll probably strip it off and start fresh but for now I'm very happy with how it came out!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Using Meguiar's G2980 Heavy Duty Headlight Restoration Kit w/new wipe on coating
    By Nick Winn in forum Headlight Restoration & Clear Plastic Detailing
    Replies: 10
    Last Post: Oct 15th, 2018, 06:28 AM
  2. Meguiar's Keep Clear Headlight Coating
    By Meguiar's Inc. in forum 2017 New Products - Product Discussion
    Replies: 39
    Last Post: Sep 17th, 2018, 02:10 PM
  3. Using Meguiar's G17804 Keep Clear Headlight Coating
    By Nick Winn in forum Headlight Restoration & Clear Plastic Detailing
    Replies: 6
    Last Post: Jul 4th, 2018, 09:57 AM
  4. Headlight and Taillight prep before Lamin-X?
    By Mike Bones in forum Detailing 101
    Replies: 0
    Last Post: Aug 20th, 2011, 09:35 AM
  5. Headlight Lens Restoral using Meguair's Pro kit and a 2 part wipe on coating.
    By Innovative Detailing in forum Headlight Restoration & Clear Plastic Detailing
    Replies: 9
    Last Post: Apr 11th, 2011, 08:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •