Ultimate polish issues

[Kial91]

Every time I use meguiars ultimate polish I find it difficult to remove. For example I

[snozan]

Re: Ultimate polish issues

Only thing i can think of is: You use to much, you let it sit too long so it dry, the surface you try to polish isnt smooth enough.

I never had any issues, and am kinda nooby

[Nick Winn]

Re: Ultimate polish issues

Hi Kial91,

Sorry to see your post was cut off. Feel free to continue when ready.

Thoughts:

Are you applying Ultimate Polish by hand or machine?

If by hand, what type of applicator pad?

If by machine, which machine & which pad are you using to apply?

How big of area are you working in at a time?

For how many passes or for how long, would you say you are working the product in?

Are you working on a cool surface in the shade?

Are you using a premium, clean microfiber towel for wipe off? If so, which kind?

From here we can further diagnose any adjustment in application technique. It is possible the product & paint just don't like each other. Unfortunately it happens. After the above questions are answered, we can work with you to come up with a next step.

Nick

[drumdan]

Re: Ultimate polish issues

Sometimes you might find that Ultimate Polish will leave a glossy "deposit" that is almost impossible to remove.

It usually occurs on the outside edges of the section being polished.

I find this happens when the paint is sort of "dry", or "sticky", and/or when I haven't shaken the bottle enough.

When this happens, simply go over that section again with a little fresh product on your pad, go over the spot again until it "reactivates" and wipe off with your microfiber towel.

I haven't had this happen in a couple years, and I use Ultimate Polish a lot.