Just had my first go with this over the weekend. Color me impressed! My black paint came out great! Was quite busy on Saturday and left it as my LSP. Will be keeping and eye on its durability.
Just had my first go with this over the weekend. Color me impressed! My black paint came out great! Was quite busy on Saturday and left it as my LSP. Will be keeping and eye on its durability.
Practice doesn't make perfect, the dedication to achieve perfection makes perfect. "Smack"
2011 Jet Black 328i Touring
2007 Jet Black 335i Sedan
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
800-854-8073 ext 3845
CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM
I asked in December for a comparison of 3 in 1 Wax to Mirror Bright Polishing Wax. Other than 3 in 1 "being the latest and greatest" (Not being at all sarcastic.) is there really any reason to switch over to 3 in 1 from the Polishing Wax? I can get the Polishing Wax darn cheap ordering through Walmart. Durability is a major issue for me. Whatever product I choose will be used on two white Tacoma trucks...both daily drivers but garaged every night as well as a large part of the day. By the way, I am a Meg's "fan boy". Been using their products almost exclusively since 1970.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
800-854-8073 ext 3845
CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM
As I heard that black wax will be discontiuned I would like to ask you about comparison 3in1 vs back wax. Because I am very satisfy with black wax. What is difference regarding cutting ability, containing of polishing olis and durability?
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
800-854-8073 ext 3845
CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM
I tried the 3 in 1 wax a couple of weeks ago with a da polisher and an orange soft cut pad. I did it on my sister's new, but pretty swirly, Kia Stonic. It turned out great. Most of the swirls were corrected on the heavier defects I used a little UC before the 3in1. The car look as good as new again.
It's going to be interesting to see how the protection holds up against a swedish winter.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
800-854-8073 ext 3845
CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM
There are currently 1 users browsing this thread. (0 members and 1 guests)