• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

ONR and Megs Ultimate Liquid Wax

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ONR and Megs Ultimate Liquid Wax

    Just used the coin-op to get the big stuff off my Tacoma. Need to finish up with ONR Wash and Shine (not Wash and Wax). Will Meg's Ultimate Liquid Wax work OK with this no rinse wash or should I apply a cleaner wax like Meg's Mirror Bright Polishing Wax instead. This will be the final wax before winter really sets in. Either wax with be applied with a PC.

  • #2
    Re: ONR and Megs Ultimate Liquid Wax

    Originally posted by tguil View Post
    Just used the coin-op to get the big stuff off my Tacoma. Need to finish up with ONR Wash and Shine (not Wash and Wax). Will Meg's Ultimate Liquid Wax work OK with this no rinse wash or should I apply a cleaner wax like Meg's Mirror Bright Polishing Wax instead. This will be the final wax before winter really sets in. Either wax with be applied with a PC.
    I do not foresee any issue with performance going from a rinseless wash product straight to a product like our Ultimate Liquid Wax, as long as you get the surface perfectly clean & free of loose contaminants.

    Another question which comes to mind is, is the surface free of bonded, rough feeling, above surface contaminants, and need to be clayed?
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

    Comment


    • #3
      Re: ONR and Megs Ultimate Liquid Wax

      Originally posted by Nick Winn View Post
      I do not foresee any issue with performance going from a rinseless wash product straight to a product like our Ultimate Liquid Wax, as long as you get the surface perfectly clean & free of loose contaminants.

      Another question which comes to mind is, is the surface free of bonded, rough feeling, above surface contaminants, and need to be clayed?
      Thanks for your response.

      No bonded contaminants so I guess I am good to go.

      Comment

      Working...
      X
      gtag('config', 'UA-161993-8');