How to use Meguiar's NEW Hybrid Ceramic Wax! - Page 8
Page 8 of 8 FirstFirst 12345678
Results 71 to 79 of 79

Thread: How to use Meguiar's NEW Hybrid Ceramic Wax!

  1. #71
    Registered Member
    Join Date
    Apr 2020
    Location
    USA
    Posts
    7
    Rep Power
    2

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    Quote Originally Posted by Nick Winn View Post
    How to use Meguiar's NEW Hybrid Ceramic Wax!

    Meguiar's Hybrid Ceramic Wax is a very easy way to get durable Si02 / polymer blended protection on your vehicle. We have been getting a lot of questions on application, so this article will walk you through our recommendations.

    Hybrid Ceramic Wax can be used as your main source of protection, but here at Meguiar's and for most of you enthusiasts which are likely reading this, we like to use it and suggest using it in addition to your favorite wax/sealant, or even on top of a coating.

    There are a couple different ways to apply Meguiar's Hybrid Ceramic Wax:

    Application Method #1 - INITIAL APPLICATION / FOUNDATION LAYER
    Application Method #2 - SUBSEQUENT APPLICATION / WAX AS YOUR RINSE

    We borrowed an employee's super cool Tesla Model 3 to make this article.



    We started with a traditional wash, using the two bucket wash method. Washing of course, removes all loose contaminants.



    Application Method #1 - INITIAL APPLICATION / FOUNDATION LAYER


    For the first time using Meguiar's Hybrid Ceramic Wax, we recommend establishing a "Foundation Layer." Hybrid Ceramic Wax is simply applied in a "wax as your dry" style. See below:

    After washing the vehicle thoroughly, & before drying, spray Hybrid Ceramic Wax across all exterior surfaces.

    Thank you so much! I recently started using it and now this is my main protection.
    Last edited by ThomasAbney; May 1st, 2020 at 12:36 PM.

  2. #72
    Product & Training Specialist Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    9,166
    Rep Power
    104

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    Quote Originally Posted by ThomasAbney View Post
    Thank you so much! I recently started using it and now this is my main protection.
    Sure thing! Takes a little getting used to & is a bit sensitive to how much product you use, i.e. don't use to much, but all in all a great product. There was a lot of engineering behind this one.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

    CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM

  3. #73
    Registered Member
    Join Date
    Mar 2020
    Location
    California
    Posts
    13
    Rep Power
    2

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    Can this be used on a coated car (Gtechniq CSL + ExoV4)? Or will it mask to properties of the coating? Is the ceramic detailer better suited for this?

    Thanks.

  4. #74
    Registered Member
    Join Date
    Sep 2021
    Location
    Advance, NC
    Posts
    1
    Rep Power
    1

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    Quote Originally Posted by Nick Winn View Post
    Sure thing! Takes a little getting used to & is a bit sensitive to how much product you use, i.e. don't use to much, but all in all a great product. There was a lot of engineering behind this one.
    So far I have applied Meguiar's Hybrid Ceramic Wax on our Travel Trailer and our 4 cars.
    All first application and wiping dry using a Micro Fiber cloth.
    I like this product a lot.
    You mention to use sparingly and I agree. When I wipe over the wet surface and then wring out the cloth, I can see some blue wax being squeezed out. So, there is a lot of the Wax still on the damp cloth ready to spread around. Certainly the process is to get that base coating down and just wiping dry with the still damp cloth did it for me.
    One of our vehicles is Black and it worked great on that dark color too.
    All of them now have a nice shine and I am hoping well protected.
    This is much easier than using traditional wax.

  5. #75
    Product & Training Specialist Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    9,166
    Rep Power
    104

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    Quote Originally Posted by Tim Semeryuk View Post
    Can this be used on a coated car (Gtechniq CSL + ExoV4)? Or will it mask to properties of the coating? Is the ceramic detailer better suited for this?

    Hybrid Ceramic Wax Spray, Hybrid Ceramic Detailer & our new Hybrid Ceramic Wash & Wax are great for boosting water beading performance / protection on coated cars.

    Thanks.
    Quote Originally Posted by cwmoser View Post
    So far I have applied Meguiar's Hybrid Ceramic Wax on our Travel Trailer and our 4 cars.
    All first application and wiping dry using a Micro Fiber cloth.
    I like this product a lot.
    You mention to use sparingly and I agree. When I wipe over the wet surface and then wring out the cloth, I can see some blue wax being squeezed out. So, there is a lot of the Wax still on the damp cloth ready to spread around. Certainly the process is to get that base coating down and just wiping dry with the still damp cloth did it for me.
    One of our vehicles is Black and it worked great on that dark color too.
    All of them now have a nice shine and I am hoping well protected.
    This is much easier than using traditional wax.
    Thank you for taking the time to join our discussion forum and let us know about your great experience! I would agree, I personally like the product a lot also. It is delivering some super potent protection & water beading characteristics in such an easy application.

    Thanks again for sharing.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

    CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM

  6. #76
    Registered Member
    Join Date
    Sep 2021
    Location
    Alberta Canada
    Posts
    3
    Rep Power
    1

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    What car soap products would be best compatible/use prior to Hybrid Ceramic Wax?

    I am currently looking at
    1) Meguiar’s Hybrid Ceramic Wash & Wax with SiO2 Boost
    2) Meguiar's Car Wash Soap - Deep Crystal
    3) Meguiar's Gold Class Car Wash Shampoo & Conditioner
    4) Meguiar's Ultimate Car Wash & Wax - Premium Carnauba and Synthetic Blend

    Thanks

  7. #77
    Registered Member Murr1525's Avatar
    Join Date
    Oct 2004
    Location
    Pittsburgh, PA
    Age
    41
    Posts
    19,277
    Rep Power
    240

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    The Hybrid Ceramic goes best, esp if you arent going to do anything after washing.

    If you are going to use the Hybrid Ceramic Spray Wax after each wash, it isnt quite as big of a deal, and the Gold Class would be ok too. You also may want a little Gold Class around for when you are doing actual detailing work after washing, since it is cheaper.
    2017 Subaru WRX Premium - WR Blue

  8. #78
    Registered Member
    Join Date
    Jul 2019
    Location
    Dallas, Texas
    Posts
    2
    Rep Power
    3

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    I hate everything about these hybrids. I would just like an honest answer from a Meguiars Specialist as to whether or not I can put ULW over the stuff. The morons at the online chat center say that you can put hybrid over ULW but not vice versa; why not? They don’t have an answer. Is it going to just wipe off or wash off in the rain? The User Experience and the car’s final appearance with ULW beats anything that the hybrids offer. I wish that I had never heard of them!

  9. #79
    Product & Training Specialist Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    9,166
    Rep Power
    104

    Re: How to use Meguiar's NEW Hybrid Ceramic Wax!

    Quote Originally Posted by James7 View Post
    I hate everything about these hybrids. I would just like an honest answer from a Meguiars Specialist as to whether or not I can put ULW over the stuff. The morons at the online chat center say that you can put hybrid over ULW but not vice versa; why not? They don’t have an answer. Is it going to just wipe off or wash off in the rain? The User Experience and the car’s final appearance with ULW beats anything that the hybrids offer. I wish that I had never heard of them!
    Interesting - we would be happy to talk through but does not sound like you are up for it. Yes Ultimate Liquid Wax can be put over anything of our Hybrid Ceramic but it will hide the water beading characteristics of the Hybrid Ceramic.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

    CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM

Page 8 of 8 FirstFirst 12345678

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •