I have a 2018 GMC Sierra 2500 that I purchased slightly used a couple months ago. I recently had new tires put on as the OEMs were horrible in the snow. The day after I get home from tire install, I notice a dirt/mud spot on my upper box side. I assume one of the used tires contacted it when they loaded them in my truck bed. I carefully clean it off and sure enough there is some minor scratches in the clear coat. I could not feel them with my fingernail but the truck color is a dark slate metallic. Scratches were only visible in bright light at certain angles. I polished them with the Meguiars drill DA with red foam pad and UC. I
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Ultimate Compound clear coat scratches
Collapse
X
-
Re: Ultimate Compound clear coat scratches
Loomis, Welcome to Meguiar's Online Forums.
It seems like your device (cell phone) is sending an end of message character when you type the apostrophe. Try using "I am" or "I have". This is a common problem for some phones.
-
Re: Ultimate Compound clear coat scratches
Sorry to see your post got cut of Loomis.Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
Comment
-
Re: Ultimate Compound clear coat scratches
Thanks, didn’t realize it did. It should have continued to say that I assume either the clear coat is much harder on the 2018 or maybe it isn’t working as well because of cold temps. It’s 30-35 here in Michigan. Anyway, I did see change but that was after 3 applications.
Comment
-
Re: Ultimate Compound clear coat scratches
Originally posted by Loomis View PostThanks, didn’t realize it did. It should have continued to say that I assume either the clear coat is much harder on the 2018 or maybe it isn’t working as well because of cold temps. It’s 30-35 here in Michigan. Anyway, I did see change but that was after 3 applications.
It's sounds like you may have met your expectations for now. Congrats on the new truck.Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
Comment
Comment