• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

    2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

    Rupes MK II w/5" backing plate and Rupes nano iBrid
    Megs 5" mf cutting discs. Rupes green & Yellow foam pads.
    Meguiars M110 and M210. Very soft gloss black OEM paint!
    Very soft mf towels! Cquartz Professional ceramic coating.

    YouTube Video (Please watch in HD 1080p w/sound). Feedback Appreciated.


    NOTE: The Before was a LOT worse than what it looks in this pic.

    Merlin Shot







    NOTE: The After was a LOT better than what it looks in this pic.

    The End


    Thanks for looking...

    Shameless Plug...
    Please subscribe to my Social Media Channels
    AMiracleDetailing
    https://www.youtube.com/c/AMiracleDetailing
    Palm Beach county's premier paint correction and protection specialists. From collectibles to daily drivers A MIRACLE delivers a show car finish with a trophy winning shine. There is no point bringing a mirror-deep shine to an imperfect surface. Detailing enhances paintwork, but paint correction repairs it.The paint correction process removes all unsightly swirl marks, micro-marring, holograms, light scratches, and water marks before the wax, sealant or coating is applied to the paintwork. A Miracle Detailing is proud to be the only installer of CQuartz FINEST in Palm Beach County, Fl. 561-877-0263

    Log into Facebook
    https://www.facebook.com/AMiracleDetailing
    Log into Facebook to start sharing and connecting with your friends, family, and people you know.

    https://twitter.com/AMiracleDetail

    New community features for Google Chat and an update on Currents
    https://plus.google.com/+AMiracleDetailing

    Mike Moore (@AMiracleDetailing) • Instagram photos and videos
    https://www.instagram.com/AMiracleDetailing
    1,906 Followers, 55 Following, 1,206 Posts - See Instagram photos and videos from Mike Moore (@AMiracleDetailing)

    Merlin - A Miracle Detailing
    YouTube - Facebook - - Instagram
    Tags: None
  • #2
    Re: 2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

    Thanks for sharing Merlin. Would be happy to hear what you think about the new 110/210.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

    Comment

    • #3
      Re: 2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

      Originally posted by Nick Winn View Post
      Thanks for sharing Merlin. Would be happy to hear what you think about the new 110/210.
      In the interior hood pic (1 up from the bottom) you can see the Scangrip Multimatch light. You can not find a swirl in the light (or sun).
      IMHO the M110/210 is a winning 1-2 punch combo. I did find some light dusting in the air with M110. It was not caused by the pad/panel.
      This was a fine dust in the air. Now it may have been my environment but later the dust settled on the paint and was easily wiped off.
      The finish I was able to achieve with M110 and M210 was truly remarkable. It looked like a wet black mirror with tires. He was blown away!

      Merlin - A Miracle Detailing
      YouTube - Facebook - - Instagram

      Comment

      • #4
        Re: 2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

        Originally posted by Merlin View Post
        The finish I was able to achieve with M110 and M210 was truly remarkable.
        Now the above quote is about as good of feedback as one can ask for! When you get a minute, i'd be happy to know what machine/pad you used to cut. More details the better. Definitely keep us in touch for future uses!

        For other members reading - Full disclosure, this is NOT a paid or "free product" review! In fact, we do not do those at all on the forum, and if we did, we would absolutely disclose it in big bold letters.
        Nick Winn
        Product & Training Specialist | Meguiar's Online Forum Administrator
        Meguiar's Inc.
        Irvine, CA
        nawinn@meguiars.com

        Comment

        • #5
          Re: 2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

          Originally posted by Nick Winn View Post
          Now the above quote is about as good of feedback as one can ask for!
          When you get a minute, I'd be happy to know what machine/pad you used to cut.
          More details the better. Definitely keep us in touch for future uses!
          Correction:
          Rupes 21 MK II - w/5" backing plate - Speed 4+
          Meguiars 5" microfiber cutting discs
          Meguiars M110 - Prime pad and a few very small pea-sized drops.
          Slow arm speed and light to medium pressure (heavy pressure not needed)

          Polishing:
          Rupes 21 MK II - w/5" backing plate - Speed 4+
          RUPES Yellow Fine Foam Pad - 5" Dia.
          Meguiars M210 - Prime pad and a few very small pea-sized drops.
          Slow arm speed and light to medium pressure

          Originally posted by Nick Winn View Post
          For other members reading - Full disclosure, this is NOT a paid or "free product" review!
          In fact, we do not do those at all on the forum, and if we did, we would absolutely disclose it in big bold letters.
          Yepper, when I ran into you at SEMA you were doing demos of the new M110/M210 twins.
          I begged, cried, pleaded and downright made a fool of my self trying to get you to let me take some home.
          A couple of the other detailing big dogs (Jason Kilmer etc.) were there too trying to break the new Megs twins and couldn't.

          No tiny samples, nothing!!! I ordered it as soon as I got home and could find it and I was chomping at the bit to give it a try.
          Yes, I bought them with my own dime!!! Now that said...I'm still a big fan of M101 and I hope it does not get discontinued!
          So just in case, I also ordered a few quarts of M101 for my personal "stash". It is still a favorite and an awesome product!

          Merlin - A Miracle Detailing
          YouTube - Facebook - - Instagram

          Comment

          • #6
            Re: 2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

            Originally posted by Merlin View Post
            Correction:
            Rupes 21 MK II - w/5" backing plate - Speed 4+
            Meguiars 5" microfiber cutting discs
            Meguiars M110 - Prime pad and a few very small pea-sized drops.
            Slow arm speed and light to medium pressure (heavy pressure not needed)

            Polishing:
            Rupes 21 MK II - w/5" backing plate - Speed 4+
            RUPES Yellow Fine Foam Pad - 5" Dia.
            Meguiars M210 - Prime pad and a few very small pea-sized drops.
            Slow arm speed and light to medium pressure



            Yepper, when I ran into you at SEMA you were doing demos of the new M110/M210 twins.
            I begged, cried, pleaded and downright made a fool of my self trying to get you to let me take some home.
            A couple of the other detailing big dogs (Jason Kilmer etc.) were there too trying to break the new Megs twins and couldn't.

            No tiny samples, nothing!!! I ordered it as soon as I got home and could find it and I was chomping at the bit to give it a try.
            Yes, I bought them with my own dime!!! Now that said...I'm still a big fan of M101 and I hope it does not get discontinued!
            So just in case, I also ordered a few quarts of M101 for my personal "stash". It is still a favorite and an awesome product!
            Hi Merlin,

            Thank you very much for taking the time to share your process and pictures! Glad you like the stuff. Couple of things I thought I would share for you to try based on your feedback - try speed 3-4 for the compounding, and even a final pass at speeds 1.5-2, which may help reduce dusting a bit, and also improve finish even further. For polishing, we have found that if ever M210 doesn't knock it out of the park from the get-go, switching to a firmer polishing pad and/or really dropping the speed down can help take the finish to the upper levels of truly flawless. Hope that helps!

            Thanks again,
            Markus - Pro Product Manager

            Comment

            • #7
              Re: 2016 Ford Mustang GT - A Miracle Detailing - Ultimate Exterior Detail

              Originally posted by Markus Kleis View Post
              Hi Merlin,

              Thank you very much for taking the time to share your process and pictures! Glad you like the stuff.
              Couple of things I thought I would share for you to try based on your feedback -

              try speed 3-4 for the compounding, and even a final pass at speeds 1.5-2, which may help reduce dusting a bit, and also improve finish even further.

              For polishing, we have found that if ever M210 doesn't knock it out of the park from the get-go, switching to a firmer polishing pad and/or really dropping the speed down can help take the finish to the upper levels of truly flawless. Hope that helps!

              Thanks again,
              Markus - Pro Product Manager
              Thank you for your response. I'll try both of those product/process changes and let you know my results.

              Interesting...slower speeds and firmer pad...Thank you again!

              Merlin - A Miracle Detailing
              YouTube - Facebook - - Instagram

              Comment

              Previous template Next
              Working...
              X
              gtag('config', 'UA-161993-8');