Tweet
Our good friend and detailer extraordinaire Larry Kosilla put M110/M210 to the test on a Maserati MC12 racecar (sure, why not??) and comes away impressed. Check out the video below.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
-
Re: Larry Kosilla puts M110/M210 to the test
IMHO M110 and M210 do not cut as much but...
Less dust, easier wipe and a much better finish.
I'm really liking the way the new twins work. -
Re: Larry Kosilla puts M110/M210 to the test
I found the info at 8:24 very interesting...Comment
-
Re: Larry Kosilla puts M110/M210 to the test
I also found 9:25 interesting.
Larry's chart appears to show M100 as having more cut than M105 or M110.Comment
-
Re: Larry Kosilla puts M110/M210 to the test
IMHO Aggressive cut between M101 and M100 depends on your preference. I prefer the M101.Originally posted by Old Bear View Post
IMHO Cut in aggressive M105, M100 and M101. I prefer M101 over M100. Good comparison vid.
Comment
-
Re: Larry Kosilla puts M110/M210 to the test
Would you say that M110 might be more comparable to something like D300 or Ultimate Compound?Originally posted by Merlin View Post
My heavy cutter is M100.Comment
-
Re: Larry Kosilla puts M110/M210 to the test
I'm not a chemist - IMHO as a user...M110 cuts much better than D300 or UC but not as much cut as M105.Originally posted by drumdan View Post
M110 behaves much better than M105. M110 has a slight less cut than M101/M100 but IMHO it finishes out better.
I have never been a big fan of M100 with a DA (Rupes included). However, I do like the way M101 cuts and finishes.
Although M101 is a few nickels more than M100, for me time is money, and M101 gets the job done better and faster.
IIRC M100 was designed for body shops to be used on a rotary. M101 was designed for a DA using foam pads.
I like M110. It cuts well and has a lot less dust than M105! M110 has a nice, easy wipe off, and it leaves a good finish.
Remember: Clear coat is precious! You don't always need to use a sledgehammer to put a thumbtack into a pine board.Comment
Comment