• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Exterior Plastic Polishing

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Exterior Plastic Polishing

    Please advice. That is the best efficient way to polish my exterior plastic?

    2018-09-22-14.51.03-min.jpg
    https://www.dropbox.com/s/6u9zd9yfzhn6nqz/2018-09-22-14.51.03-min.jpg?dl=0
    Shared with Dropbox


    I have:
    PlastX
    Scratch 2.0
    SwirlX
    Cut #2
    and
    DA Power System with all pads.

    Can I use something from my staff? What it the best way to apply hand or DA Power system?
    Tags: None
  • #2
    Re: Exterior Plastic Polishing

    PlastX and a yellow pad have worked well for me by machine. If PlastX is not aggressive enough, go to either your SwirlX or ScratchX in that order.

    Bill

    Comment

    • #3
      Re: Exterior Plastic Polishing

      Bill, Thank you. Will try.

      Comment

      Previous template Next
      Working...
      X
      gtag('config', 'UA-161993-8');