After I put wax on my Black base coat-clear paint, should I use my orbital buffer, or polish it by hand?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Keith
Collapse
X
-
Re: Keith
Welcome to MOL.
Plishing is always before applying any sort of protection. Polishing after will remove the protection that was applied.
-
Re: Keith
Unless you would mean removing the wax... you cna remove wax by machine with a good quality terry bonnet. But if applied correctly (such as thin coats, almost no excess), will remove easily by hand and a MF towel, or slight damp MF towel.2017 Subaru WRX Premium - WR Blue
Comment
Comment