First time machine detailing. I'm using a Craftsman rotary polisher 1450 / 1600 rpms with an orange waffle sponge pad. I have Meguiars 105 & 205. I did use a clay bar with Meguiars detailing spray after I washed. I also used Meguiars detailing spray with the cutting and polishing compounds. As the paint started to clear up I noticed tiny dimples all over the paint. I reapplied Meguiars 105 with limited results. Some places do look smoother than others but I wasn't sure if that was from the polishing. I thought the pock marks might be from me as well until I looked closely at the fender that I had not touched. And then a different type of blemish showed up and I have no idea if that was because of my handiwork. Please see attached pictures and let me know what's happening thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Micro dimples and other blemishes
Collapse
X
Comment