Help - G110v2/7" yellow pad/ultimate compound, not strong enough
Results 1 to 8 of 8

Thread: Help - G110v2/7" yellow pad/ultimate compound, not strong enough

          
  1. #1
    Registered Member
    Join Date
    Jun 2019
    Location
    Meridian ID
    Posts
    4
    Rep Power
    1

    Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Hi Michael,
    7 years ago I took a class you hosted and learned how to make my Black Mustang 5.0 look incredible all the time. No swirls ever. Bought a DA, compound, polish and wax and applied everything you taught and it worked flawlessly. Fast forward 7 years. I have a 2019 Harley Davidson Softail Slim in Vivid Black. It has light swirls on the tank. I did the same routine that worked on my Mustang but on this bike it doesn't seem to have the same results. After applying the Ultimate compound with a yellow pad like I did on the Mustang, it still has swirls and fine scratches you can see in direct sun. So Michael, what do you think is the best way to attack this Harley to get that flawless Meguiar's finish?

  2. #2
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    7,773
    Rep Power
    88

    Re: Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Quote Originally Posted by voornas View Post
    Hi Michael,
    7 years ago I took a class you hosted and learned how to make my Black Mustang 5.0 look incredible all the time. No swirls ever. Bought a DA, compound, polish and wax and applied everything you taught and it worked flawlessly. Fast forward 7 years. I have a 2019 Harley Davidson Softail Slim in Vivid Black. It has light swirls on the tank. I did the same routine that worked on my Mustang but on this bike it doesn't seem to have the same results. After applying the Ultimate compound with a yellow pad like I did on the Mustang, it still has swirls and fine scratches you can see in direct sun. So Michael, what do you think is the best way to attack this Harley to get that flawless Meguiar's finish?
    Mike Stoops is not on the forum as often since he is in a different role, but I can help & work through this with you.

    It sounds like you just need to step up a bit in aggressiveness. I am assuming you have our older G110 d/a polisher machine & older 7" Soft Buff Foam Pads?
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

    CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM

  3. #3
    Registered Member
    Join Date
    Jun 2019
    Location
    Meridian ID
    Posts
    4
    Rep Power
    1

    Re: Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Quote Originally Posted by Nick Winn View Post
    Mike Stoops is not on the forum as often since he is in a different role, but I can help & work through this with you.

    It sounds like you just need to step up a bit in aggressiveness. I am assuming you have our older G110 d/a polisher machine & older 7" Soft Buff Foam Pads?

    Hi Nick,
    Thanks for replying so quickly.
    Yes My DA is the 110V2 and I am using the Yellow Soft Buff 7" pads. So your saying to apply more pressure as I'm using the compound? I have the setting on 4.

  4. #4
    Registered Member Old Bear's Avatar
    Join Date
    Dec 2015
    Location
    San Juan Capistrano CA
    Posts
    577
    Rep Power
    9

    Re: Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Another way to increase aggressiveness when using a D/A polisher could be to move to 5 inch pads.
    The smaller backing plate/pad should concentrate the tools work to a smaller area.

    Would a 5 inch pad also help you follow the curves on your HD?
    Could it help you keep the working surface flat on the work surface?

  5. #5
    Registered Member
    Join Date
    Jun 2019
    Location
    Meridian ID
    Posts
    4
    Rep Power
    1

    Re: Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Quote Originally Posted by Old Bear View Post
    Another way to increase aggressiveness when using a D/A polisher could be to move to 5 inch pads.
    The smaller backing plate/pad should concentrate the tools work to a smaller area.

    Would a 5 inch pad also help you follow the curves on your HD?
    Could it help you keep the working surface flat on the work surface?
    Actually yes the smaller pad would be a lot easier to follow the curves of the tank. Makes a lot of sense and is an affordable solution.

  6. #6
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    7,773
    Rep Power
    88

    Re: Michael I need your help

    Quote Originally Posted by voornas View Post
    Hi Nick,
    Thanks for replying so quickly.
    Yes My DA is the 110V2 and I am using the Yellow Soft Buff 7" pads. So your saying to apply more pressure as I'm using the compound? I have the setting on 4.
    No, that is not neccssarily what I was saying, just needed some more info before we could make some recommendations.

    First thought, like Old Bear mentioned, is that yes, switching to our next generation 5" Soft Buff D/A Foam Discs, including the now dedicated red cutting disc, will improve all kinds of things on your G110v2, defect removal ability, finish polishing performance, much smoother, less vibration, more efficient pad rotation. So again this would be recommended. You will need to upgrade backing plates as well, to our DBP5 Soft Buff D/A Backing Plate (5"). Below is a link to more info:

    Meguiar's Soft Buff DA Foam Discs & Backing Plates

    Another thought, especially for a motorcycle, is our 4 Inch Foam D/A Power Pads. These can be used on your dual action polisher as well as our current MT300 dual action polisher. You will need to invest in our DBP3 Soft Buff D/A Backing Plate (3 Inch), but these would be a must for me if I owned a street motorcycle:

    https://www.meguiarsdirect.com/meguiars-da-backing-plate-3inch.html

    https://www.meguiarsdirect.com/megui...ower-pads.html

    https://www.meguiarsdirect.com/meguiars-da-polishing-power-pads.html

    https://www.meguiarsdirect.com/meguiars-da-waxing-power-pads.html

    In my opinion, with autos & motorcycles, if I were you, I would have both.

    Below is another article which is a good reference if you have not seen yet:

    D/A Polisher Basics with Meguiar's MT300
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

    CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM

  7. #7
    Registered Member
    Join Date
    Jun 2019
    Location
    Meridian ID
    Posts
    4
    Rep Power
    1

    Re: Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Quote Originally Posted by Nick Winn View Post
    No, that is not neccssarily what I was saying, just needed some more info before we could make some recommendations.

    First thought, like Old Bear mentioned, is that yes, switching to our next generation 5" Soft Buff D/A Foam Discs, including the now dedicated red cutting disc, will improve all kinds of things on your G110v2, defect removal ability, finish polishing performance, much smoother, less vibration, more efficient pad rotation. So again this would be recommended. You will need to upgrade backing plates as well, to our DBP5 Soft Buff D/A Backing Plate (5"). Below is a link to more info:

    Meguiar's Soft Buff DA Foam Discs & Backing Plates


    Another thought, especially for a motorcycle, is our 4 Inch Foam D/A Power Pads. These can be used on your dual action polisher as well as our current MT300 dual action polisher. You will need to invest in our DBP3 Soft Buff D/A Backing Plate (3 Inch), but these would be a must for me if I owned a street motorcycle:

    https://www.meguiarsdirect.com/meguiars-da-backing-plate-3inch.html

    https://www.meguiarsdirect.com/megui...ower-pads.html

    https://www.meguiarsdirect.com/meguiars-da-polishing-power-pads.html

    https://www.meguiarsdirect.com/meguiars-da-waxing-power-pads.html

    In my opinion, with autos & motorcycles, if I were you, I would have both.

    Below is another article which is a good reference if you have not seen yet:

    D/A Polisher Basics with Meguiar's MT300

    This is why I continue to be a loyal customer!
    Thank you Nick for all of the information. I'm glad this problem can be addressed with the right tools and I'll start reading what you've sent. I'm looking forward to having the same mirror finish on this bike as I have on my Mustang. Black paint can be a challenge but IMO nothing looks better when it's done right. Thank you again!

  8. #8
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    7,773
    Rep Power
    88

    Re:Help - G110v2/7" yellow pad/ultimate compound, not strong enough

    Quote Originally Posted by voornas View Post
    This is why I continue to be a loyal customer!
    Thank you Nick for all of the information. I'm glad this problem can be addressed with the right tools and I'll start reading what you've sent. I'm looking forward to having the same mirror finish on this bike as I have on my Mustang. Black paint can be a challenge but IMO nothing looks better when it's done right. Thank you again!
    We are happy to help! Feel free to keep us in touch and/or post further questions. I am also going to change the name of your thread FYI, to a title which relates to the topic we are discussing, this way, if someone comes across the thread in a search, it can help them also.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

    CLICK HERE TO REGISTER AS A MEMBER FOR MEGUIAR'S ONLINE DISCUSSION FORUM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Thank you Michael Stoop!
    By phillm47 in forum Detailing 101
    Replies: 0
    Last Post: May 28th, 2016, 12:03 PM
  2. New Member Michael D
    By madonemike554 in forum Introduce Yourself - New Members
    Replies: 4
    Last Post: Jul 5th, 2011, 07:04 PM
  3. Att: Michael Stoops...
    By TH0001 in forum Detailing 101
    Replies: 5
    Last Post: Dec 23rd, 2010, 05:18 AM
  4. Michael Jackson This Is It
    By CieraSL in forum The Break Room
    Replies: 13
    Last Post: Oct 31st, 2009, 05:44 AM
  5. Congratulations Michael Stoops !!
    By Mike Pennington in forum Company & Forum Announcements
    Replies: 54
    Last Post: Sep 8th, 2009, 09:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •