• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Have I Wet Sanded Too Far?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Have I Wet Sanded Too Far?

    I'm attempting to repair a moderate depth scratch, and I started out with wet sanding after a thorough cleaning/clay, IPA wipedown. With a DA I compounded and polished the area after and this is what we look like. Have I gone too far through the clear coat below the scratch? I have an OEM paint correction pen for the scratch since it's fairly deep. I filled in the scratch with paint and clear coat since taking this picture, but I haven't done anything more with the faded area below the scratch yet, nor have I polished the new paint yet. What to do?





    Tags: None
  • #2
    Re: Have I Wet Sanded Too Far?

    It appears so. I'm assuming you tried to wipe off the blotch area below the scratch? Regarding what needs to be done with a sand through / burn through, needs to be repainted. Whether that is stripping whole panel, or a shop performing a blend within the panel.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

    Comment

    • #3
      Re: Have I Wet Sanded Too Far?

      I would do that myself Just buy (and now i just took something, i have no really clue what it is called in english) but with this you can do a spot repair with very good results

      Error page | eBay
      https://www.ebay.co.uk/itm/151460085148

      Comment

      Previous template Next
      Working...
      X
      gtag('config', 'UA-161993-8');