Tweet
Just joined forum. I clay bar my cars every spring and fall and decided to use ceramic hybrid as the lubricant. Washed the car, rinsed and did not towel dry. Sprayed hybrid on a panel and then clay barred - making sure to pass over the whole panel. Then hosed as you would when using hybrid when waxing the car. Worked great !! Made sure each panel was wet prior to spraying hybrid and claying. Took only about 20 minutes to clay bar and wax car.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Clay barred using ceramic hybrid as lubricant
Interesting idea. Did you feel the need to be liberal with the product in order to get the lubricity you needed for the clay? I find that most HCW users are spraying WAY too much of the product on a panel. The Meguiar's how-to videos show something like 2 or 3 sprays max per panel. -
Re: Clay barred using ceramic hybrid as lubricant
I sprayed just enough to spread over the surface. 2 to 3 sprays worked out fineOriginally posted by trom120 View PostComment
Comment