Tweet
I did some correction today on my BMW. I use the microfiber pads. I also found a microfiber pad that is very thin - about 1/2 of the regular pads. What are these used for?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Another Pad question
It sounds like you are referring to our D/A Microfiber Extra Cut Disc?Originally posted by southcoastie View Post
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com -
Re: Another Pad question
Yes; and it sounds like the description of "extra cut" answers my question.Comment
-
Re: Another Pad question
Yes, these deliver around 35% more cut compared to our standard DMC3/DMC5/DMC6 D/A Microfiber Cutting Disc and are primarily recommended for flat panels due to having 0 foam backing.Originally posted by southcoastie View PostNick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.comComment
Comment