If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hey everyone hope you're all safe and healthy first and foremost. Any how my question is can I use M62 in my foam cannon with my pressure washer with proper mixing or should I send just that back and get shampoo plus?
Thanks
2001 Audi A6 Avant (wagon)
Ming Blue Pearl Effect metallic
Hey everyone hope you're all safe and healthy first and foremost. Any how my question is can I use M62 in my foam cannon with my pressure washer with proper mixing or should I send just that back and get shampoo plus?
Thanks
I have not tried that specific wash in a foam cannon but given the design of the product it should work great.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Hey everyone hope you're all safe and healthy first and foremost. Any how my question is can I use M62 in my foam cannon with my pressure washer with proper mixing or should I send just that back and get shampoo plus?
Thanks
You certainly can... it might not be quite as thick/clingy as a soap for cannons, but will be ok. Just check whatever you diution ratios are (you probably want to dilute a bit in the soap holder) and try for around 128:1.
You certainly can... it might not be quite as thick/clingy as a soap for cannons, but will be ok. Just check whatever you diution ratios are (you probably want to dilute a bit in the soap holder) and try for around 128:1.
My soap holder is 32oz. i know for the bucket 128:1 is the proper ratio ex. 5:1 for 5 gallon bucket but for the container what do you mean 128:1? I found a dilution chart from the chemical guys that has all the mixing measurements for all the typical containers used (16oz, 32oz, 1 gal, 5 gal)
2001 Audi A6 Avant (wagon)
Ming Blue Pearl Effect metallic
Comment